Overview
The Oracle Lighting H4 S3 LED Headlight Bulb Conversion Kit, part number ORCS5231-001, is an LED headlight bulb built on the H4 base. It is a universal-fit kit, so the match comes down to the H4 base in your headlight rather than a vehicle.
The S3 family provides 3200 Lumens with 6000K color output. A sealed, waterproof heat-sink body carries the electronics, so the bulb needs no external driver and no cooling fans. The LEDs use a CSP (Chip Scale Package) chip, which keeps the package small and the heat value low for its intensity.
The low-profile form is designed to reduce common bulb fitment problems in a plug and play DIY installation.
Key features
- 3200 Lumens of 6000K light output
- Sealed waterproof heat-sink housing
- No external driver or cooling fan
- CSP (Chip Scale Package) LED chip
- Low-profile design aimed at fitment issues
- Plug and play DIY installation
- H4 bulb base type
Beam aim and headlight care
A headlight is a reflector system, so the bulb position and the beam pattern work together. After any headlight bulb change, the aim should be checked on a flat wall at the same height as the headlights. An H4 bulb that sits slightly off-center can throw light too high or too low, which affects both visibility and the comfort of oncoming drivers.
Good headlight care also covers the lens and seals. A cloudy or scratched lens can scatter light even with a new bulb, and a damaged seal lets moisture into the housing. Clean the lens with a soft cloth, check the seal for cracks, and keep the bulb base dry when reinstalling the cover.
- Check aim on a wall after every bulb change
- Clean the lens with a soft cloth
- Inspect the seal for cracks
- Keep the base dry during reinstallation
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORCS5231-001 |
| Bulb base type | H4 |
| Light output | 3200 Lumens |
| Color temperature | 6000K |
| LED chip | CSP (Chip Scale Package) |
| Housing | Sealed, waterproof heat-sink |
| Fitment | Universal fit |
Vehicle fitment
This H4 kit is a universal-fit part, so no particular year, make or model is attached. The H4 socket in your headlight is the main compatibility point.
The S3 line includes other bases, such as H3, under separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by seating the H4 base fully, then reassemble the headlight. This is a DIY plug-in installation. After mounting, recheck the aim and confirm the setup meets lighting rules for the roads you drive.
What’s included
The kit is an H4 LED headlight bulb conversion kit.
Not included: Check the package contents against your installation before starting, including any drivers, fans or mounting hardware you need.










