Overview
The Oracle Lighting H16 LED headlight bulb pair, part number ORC5237-001, provides two H16 base LED headlight bulbs with 4,000+ Lm of output. It is a universal-fit pair with no vehicle tied to it, so confirm that your headlight housing takes an H16 base before installing.
The bulbs use Philips Luxeon ZES chips for the added output while drawing less than half the power of the factory headlight bulb. The smaller chips dissipate heat well, which supports reliable operation in harsh environments. The internal driver components were designed by Samsung.
The heat sink can be adjusted and removed. That allows the bulb to be reverse installed or mounted outside the headlight back cap, which Oracle presents as added adaptability in tight housings.
Key features
- Philips Luxeon ZES LED chips
- 4,000+ Lm light output
- Less than half the power draw of the factory headlight bulb
- Samsung-designed internal driver components
- Removable adjustable heat sink
- Pair with two connectors and two compact LED drivers
Matching the H16 base
The H16 base is the deciding factor for fit, so check the socket type in your housing before buying a pair. Inside the headlight, the base, connector and driver must all sit where they can move air. A tight space can trap heat, which is why the adjustable heat sink helps in some housings.
Fitting a pair means the two sides should match in position and light output. Start by seating the base on each side, then fit the driver and connector. Check the cable route for pinch points, and recheck beam aim once the lights have run for a while.
- Confirm the H16 base before ordering
- Install both sides in the same position
- Keep wires away from hot surfaces
- Recheck aim after the first drive
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5237-001 |
| Bulb type | LED |
| Single or pair | Pair |
| Bulb base type | H16 |
| Light output | 4,000+ Lm |
| LED chips | Philips Luxeon ZES |
| Included | 2 bulbs, 2 connectors, 2 compact LED drivers |
| Fitment | Universal Fit |
Vehicle fitment
These H16 bulbs are universal fit, so they are not matched to one vehicle. The H16 base must match your headlight socket.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adjustable heat sink can be removed to reverse install the bulb or to mount it outside the headlight back cap when space is tight. Fit the connectors and compact drivers as part of the same set.
Disconnect the headlight power before working on the connectors.
What’s included
Two H16 LED headlight bulbs, two H16 connectors and two H16 compact LED drivers.













