Select your vehicle

Replacement and upgrade headlights for Jeeps, trucks, and classic 4x4s, from sealed beam units and halogen conversion lamps to LED and halo projector sets. Brands in this category include Spyder Auto Group, Hella, Omix-Ada, Crown Automotive, and JW Speaker. Each product page lists the lamp size, bulb type, and vehicle notes, so confirm fitment and then compare the products below.

Showing 1–12 of 97 resultsSorted by popularity

Types of headlights

Headlights in this category fall into a few groups. Sealed beam units are one-piece lamps with the filament built in, common on older Jeeps and trucks. Halogen conversion lamps, such as 5x7 inch and 7 inch round designs, use a replaceable bulb such as H4. Complete housings, including projector and LED halo assemblies, replace the entire factory headlamp, often as a left and right pair.

Choosing the right style

  • Round 7 inch lamps fit many CJ, YJ, TJ, and older trucks. Measure or check the factory lamp shape first.
  • Rectangular 5x7 inch or 164x103 mm lamps suit vehicles such as XJ Cherokees and YJ Wranglers, depending on year.
  • Replacement assemblies for JK Wranglers and late-model trucks are model specific and often plug into the factory harness.
  • Projector designs focus the beam through a lens, while reflector designs rely on a mirrored bowl.

Specs and details to compare

Look at bulb type and whether bulbs are included, because some listings say bulbs are not included. Check the beam function, since some lamps are low beam only and others combine high and low. Look for approvals such as ECE or SAE markings, which indicate the lamp is designed to a published beam pattern. Note whether the set is sold as a pair, the lens material, such as polycarbonate with UV protection, and the bezel color.

LED upgrades and legality

Installing LED bulbs in housings designed for halogen bulbs can scatter light and produce glare for oncoming drivers, so a lamp engineered for LED is a safer choice. Headlight requirements, including approvals and color, differ by state, so check local regulations. After installation, aim the headlights following the vehicle manual, particularly if the suspension has been lifted.

Installation and compatibility

Most replacements install with basic hand tools, though some assemblies require removing the grille or bumper trim. Disconnect the battery before working on wiring and avoid touching halogen bulb glass with bare fingers. Confirm fitment for your exact year, make, and model, including cab style and trim, and check the manufacturer specifications on each product page.

Keep a spare bulb of the correct type in the vehicle where practical, and replace bulbs in pairs, because the second one is usually close to the end of its life. Clean lenses with a mild soap solution to maintain light output, and inspect seals for moisture inside the housing.

Maintenance and upgrades

Foggy or yellowed lenses cut light output considerably, so clean or restore them before spending money on new lamps. Polycarbonate lenses are lightweight and impact resistant but need a UV protective coating to avoid hazing. Moisture inside a housing usually means a failed seal or vent, and it tends to return unless the cause is fixed. When upgrading, check the vehicle wiring, because high-wattage bulbs can overload old connectors and melt plugs. A relay harness that draws power directly from the battery protects the factory wiring and gives the lamps steadier voltage. Replace corroded connectors and apply dielectric grease to the contacts. After any change, test both high and low beams and check the aim against a wall at night.

Popular Headlights brands

Headlights FAQ

Are LED bulbs legal in halogen headlights?

Rules vary by state and by whether the lamp is approved for LED use. Bulb swaps in halogen housings often fail to produce a correct beam pattern. Check your local regulations and consider a lamp designed for LED.

Do headlights come with bulbs?

It depends on the product. Some listings state bulbs included, while others, such as certain Hella conversion lamps, say the bulb is not included. Read the features on the product page.

What is the difference between sealed beam and halogen conversion headlights?

A sealed beam is a single sealed unit, so the whole lamp is replaced when the filament fails. A conversion lamp takes a separate halogen bulb, which is easier to replace and offers more bulb choices.

Do I need to aim headlights after installing them?

Yes. New lamps can sit slightly differently, and lifted vehicles point the beams higher. Aim them according to the vehicle manual or have a shop adjust them so you do not blind other drivers.