Overview
The Oracle Lighting Oculus 5876-334 is a 7-inch Switchback Bi-LED projector headlight in the ColorSHIFT RGB+W color-changing version, fitted to the 2007–2018 Jeep Wrangler JK. It ships with no controller, so color changing depends on a separate controller.
The Oculus Bi-LED headlamp uses LED projection with 4,800 lumens of illumination. The LED light source draws less power than the factory lamps while giving more light output.
Each LED feature has a separate cable output. The three can be wired together to show one color, or set up as three separate channels or zones, depending on the controller used. The BC1 ColorSHIFT Controller and Y-Splitter Adapters form the control route. These headlights are for off-road show use only and are not intended for street use.
Key features
- Oculus Bi-LED projector design with 4,800 lumens of illumination
- ColorSHIFT RGB+W color-changing LEDs
- Separate cable output for each of the three LED features
- Wiring options for one shared color or three separate channels or zones
- Lower power demand than the factory lamps, with more light output
- Y-Splitter Adapters offered for control with the BC1 ColorSHIFT Controller
Wiring for color control
Color changing on a Bi-LED set comes down to how the three feature cables are wired. Shared wiring gives one color across all features, while separate channels let each feature change on its own. Plan the layout on paper before cutting any loom, and label each cable so the controller output matches the feature it drives.
Splitters add wiring points that need solid connections. Use clean crimps, keep wire runs away from heat and moving suspension parts, and secure the loom with clips. Because this set is for show use, check the wiring after each outing rather than assuming it holds.
- Label each cable before routing
- Choose shared or separate channels before installing
- Keep splitter joints dry and tight
- Recheck wiring after each trip
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5876-334 |
| Headlight type | Oculus Bi-LED projector |
| Lumens | 4,800 |
| Color option | ColorSHIFT RGB+W |
| Controller | Not included |
| Intended use | Off-road show use only |
Vehicle fitment
The fitment covers the 2007–2018 Jeep Wrangler (JK), including two-door trims such as Rubicon, Sahara, Sport and X, and Unlimited four-door trims. The Jeep Wrangler JL, Gladiator, and the 1997–2006 TJ and 2004–2006 LJ generations are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the control setup before installation, since no controller comes with the set. Use the Y-Splitter Adapters and BC1 ColorSHIFT Controller as the control route. Off-road show use is the intended purpose.
What’s included
The Oculus headlight set in the ColorSHIFT RGB+W version, with separate cable outputs for each LED feature.
Not included: The title specifies No Controller, so the ColorSHIFT controller is not part of this set.































