Overview
The Oracle Lighting PSX24W/2504 LED headlight bulbs (part ORC5245-001) are high-output LED replacement bulbs that are universal fit, with no specific vehicle, model year or chassis code assigned. They are rated at 4,000+ Lm.
The bulbs use Philips Luxeon ZES chips for higher lumen output while drawing less than half the power of a factory headlight bulb. The chips dissipate heat well, and the internal driver components were designed by Samsung in a smaller package.
The result is a wide blanket of light that helps the driver see at night, which supports safer nighttime visibility. The adjustable heat sink is removable, so it can be reverse installed or mounted outside the back-cap for added flexibility.
Key features
- 4,000+ Lm light output
- Philips Luxeon ZES chips
- Lower power draw than the factory headlight bulb
- Smaller chips with strong heat dissipation
- Samsung-designed internal drivers in a smaller package
- Removable adjustable heat sink for reverse installation or outside mounting
Beam pattern and aim
The beam pattern from an LED headlight depends on how the chips sit relative to the reflector or lens. A bulb that is slightly off-center can throw light too high, which dazzles oncoming traffic, or too low, which shortens the view down the road. Because LED chips are small, even a minor change in seating can shift the pattern.
After any bulb change, check that the bulb is fully seated and that the base is locked in place. Aim the headlights on level ground with the vehicle loaded normally, and recheck after a few weeks of driving. Keep the heat sink clear of dust and debris so the bulb keeps working the way it was designed to.
- Seat the bulb fully before closing the housing
- Aim on level ground with a normal load
- Recheck aim after the first few drives
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5245-001 |
| Product type | LED headlight bulbs |
| Bulb designation | PSX24W/2504 |
| Light output | 4,000+ Lm |
| LED chips | Philips Luxeon ZES |
| Heat sink | Adjustable, removable |
| Fitment | Universal fit |
Vehicle fitment
The kit is universal fit, so it is not tied to a specific make, model or year. Check the bulb designation PSX24W/2504 against the bulb your headlight takes before ordering.
Universal fit does not confirm that a particular truck or SUV is covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The heat sink is adjustable and removable, which gives the option of reverse installation or mounting outside the headlight back-cap. Disconnect the battery before changing the bulbs.
What’s included
Confirm the quantity of bulbs and any connectors or drivers against your installation before ordering.









