Overview
The Oracle Lighting H3 S3 LED Headlight Bulb Conversion Kit, part number ORCS5248-001, is an LED headlight bulb with an H3 base. It is a universal-fit kit, so it carries no specific vehicle year, make or model. The H3 base and your housing are the compatibility check.
The S3 bulbs deliver 3200 Lumens of 6000K light output. The electronic components sit in a sealed, waterproof heat-sink body, so the design uses no external driver and no cooling fan. The LED chip is a CSP (Chip Scale Package) design, which gives a small package size with high intensity per unit and less heat.
The low-profile housing is designed to reduce common bulb fitment issues during a simple installation.
Key features
- 3200 Lumens of 6000K light output
- Sealed, waterproof heat-sink housing for the electronics
- No external drivers or cooling fans required
- CSP (Chip Scale Package) LED chip design
- Low-profile body intended to reduce common bulb fitment issues
- Plug and play installation described by Oracle
- H3 bulb base type
Sealed LED bulbs and headlight wiring
Sealed heat-sink bulbs keep their electronics in one body, so there is no separate driver box to mount or route. That makes the wiring simpler, but the seal and the position of the heat sink still matter. A bulb pinched by the reflector or cover can stop heat from moving away from the body, so the fit needs a quick visual check.
Plug and play installs still benefit from careful work. Clean the connector before fitting, and make sure the wiring has room to move without straining the base. Dust and water are the main threats to a sealed design, so keep the headlight cover intact and the seal clean. When a bulb fails, check the connector and fuse before blaming the bulb.
- Look for pinch points around the heat sink
- Keep the connector clean and dry
- Check the fuse before blaming the bulb
- Keep the cover seal intact
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORCS5248-001 |
| Bulb base type | H3 |
| Light output | 3200 Lumens |
| Color temperature | 6000K |
| LED chip | CSP (Chip Scale Package) |
| Housing | Sealed, waterproof heat-sink |
| Fitment | Universal fit |
Vehicle fitment
This H3 kit is a universal-fit part, so it is not tied to specific vehicles. Check that the socket in your vehicle takes an H3 base before installing.
The S3 line includes other base types such as H4, which are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is plug and play, with the electronics sealed in the heat-sink body. Seat the H3 base fully and make sure the bulb sits so the sealed housing is not pinched by the reflector or cover. Check aim after fitting.
What’s included
The kit is an H3 LED headlight bulb conversion kit with the electronics built into the sealed heat-sink body.
Not included: Check the package contents against your installation before starting, including any drivers, fans or brackets you need.










