Select your vehicle

Lighting Accessories

This category collects the small parts that finish or protect a lighting setup. Browse lens covers, replacement lenses, bezel sets, daytime running light kits, dome light parts, wiring adapters and LED resistors from Oracle Lighting, KC HiLites, Baja Designs and Rigid Industries. Check light size and series on each product page, then compare the products below.

Pro Comp two-light wiring harness with relay and illuminated switch

The small parts decide whether a light setup lasts. A cover keeps a rock from cracking a lens on the trail, the right harness keeps a fuse from blowing, and a spare lens or bezel can save an expensive light. This category gathers those pieces for Rigid, Baja Designs, KC HiLites, Hella and other lights.

Half the range is covers, shields and replacement lenses, and nearly all of them are made for one light series and size. The rest is wiring and trim: harnesses for pairs of off-road lights, plug-and-play adapters for factory connectors, a resistor for LED bulbs, headlight and tail light bezels, door jamb switches and a daytime running light kit. Know your light's brand and series before you shop.

64Parts listed
14Brands
8Part types
32Covers and shields
4–50"Cover sizes listed
325 WMax on Baja XL harness

Shop lighting accessories by type

Popular lighting accessories

Covers, lenses and wiring reference

Covers and lenses are sold by light series, not by size alone. Use the series names below to match what is on your vehicle.

Cover types

What it doesExamples here
Clear coverGuards the lens, keeps the beamRigid 360-Series 4", D-Series
Black coverHides and protects when offRigid 360 4", E-Series 50"
Colored coverChanges output colorRigid Q white, RDS green
Soft or vinyl coverDust and chip cover, light useKC 6" soft, 8" HID vinyl
Rock guard or shieldTakes stone hitsBaja XL, Hella 4000 Compact

Wiring parts from listings

Pro Comp 764002 lights, relay, lighted dash switch
Baja 640117Pair of Squadron or S2 lights
Baja 640119XL/OnX6 hi-power, 325 W max
Baja 640176Blacklit add-on for LP9, LP6, LP4
Oracle 5880-504Gladiator JT reverse lights, 2020-on
Oracle 5844-504H4 headlight adapters, pair
Morimoto LF434XB tail lights on 2018+ Ford trucks
Rigid 40282D-Series security nuts, bolts, key

Lens kit beam patterns

BeamKits listed
SpotLong and narrowBaja LP6 clear and amber
Driving / comboReach with some spreadBaja LP9, S2, Squadron
Wide corneringShort and very wideBaja Squadron amber
Colored single lensSame beam, new colorKC Cyclone V2 amber, red, green, blue

Series covered

Rigid Industries360, D, E, Q, SR-Q, SR, RDS
Baja DesignsLP4, LP6, LP9, S2, Squadron, XL
KC HiLitesCyclone V2, FLEX ERA 3, FLEX ERA 4
Hella4000 Compact
Rugged RidgeElite Euro and Euro guard kits

Colored and blacked-out covers may not be legal on the road where you live. Check your state's rules before driving with them.

All Lighting Accessories 60 parts

Showing 1–12 of 60 resultsSorted by popularity

What counts as a lighting accessory

Lights themselves live in other categories. Here you will find the parts that go with them: protective covers, replacement lenses, bezels, wiring kits, resistors and interior or daytime lighting upgrades. They are useful when you are maintaining existing lights or adapting a new installation to your vehicle.

Covers, lenses and bezels

  • Light covers: vinyl, plastic or rock-guard covers shield the lens from stone chips and mud, and some are tinted amber or clear. Always use the covers made for your light's size and series, such as 4 inch, 6 inch, 8 inch or a given light bar length.
  • Replacement lenses: available in colors and optics for specific models, such as the single lenses sold for certain KC HiLites fog and driving lights. Colored lenses change the output color and may be restricted for road use.
  • Bezel sets: trim rings for headlight, tail light or off-road light housings, which change the look and can protect edges.

Wiring and electrical items

  • Wiring kits and harnesses: include a relay, fuse and switch. Plug-and-play adapters connect to factory reverse light or headlight wiring without cutting.
  • LED resistors: some vehicles detect a lower current from LED bulbs and show a bulb-out warning or cause flicker. A resistor or adapter loads the circuit to avoid this.
  • Daytime running light kits: add low-power LED strips or modules that operate while the vehicle is running.
  • Dome light parts: switches and interior replacements for cabin lights.

Choosing the right part

  1. Identify the exact light model and size, since covers and lenses are not universal even when they look alike.
  2. Check whether the part is universal or direct fit for a specific vehicle.
  3. Match connectors and wire gauge to the circuit load.
  4. For color-changing kits, review the control method, such as a remote or app, and what power source it requires.

Installation and legal notes

Disconnect the battery before working on wiring, protect the wire run from heat and sharp edges, and fuse every added circuit near the power source. Lighting laws on color, flashing or color-shifting lights and covers vary by state, so check your local regulations before using accessories on public roads.

Confirm fitment and review the manufacturer's specifications on each product page, then compare the products below.

Planning a tidy installation

Accessories work best when planned together. Before ordering several items, write down your light model names and sizes, the vehicle connectors, and any harness lengths you need. Consider labeling both ends of each wire. Use split loom and zip ties so the harness stays away from moving parts and hot surfaces.

Keep spare lenses and covers with your recovery kit. A cracked lens in the field can let dust and water ruin a light, and a spare lens, often a simple swap, protects the investment in the light itself.

If you are unsure what a part is meant for, read the manufacturer's description closely. Items like bezel sets, driving light wire harnesses and dome light switches look simple but are model-specific, and a harness built for one connector type will not plug into another. Photographing the existing wiring before you disconnect anything makes later matching far easier.

Popular Lighting Accessories brands

Lighting Accessories FAQ

Are light covers universal?

Usually not. Covers are made for specific light sizes and series, such as a 4 inch round or a particular light bar length. Check the cover's listed compatibility against your light's model before choosing.

Why do I need an LED resistor?

Some vehicles monitor bulb current and interpret the low draw of an LED as a burned-out bulb, causing warnings or fast flashing. A resistor or load adapter adds the expected load so the vehicle's system stays quiet.

Can I use colored lenses on the road?

Lighting color rules vary by state, and many restrict colors other than white or amber on a moving vehicle. Colored lenses are often intended for off-road use. Check local regulations first.

What does a DRL kit do?

A daytime running light kit adds LED lamps that stay lit while the vehicle runs to improve visibility during the day. Check wiring requirements and local rules about brightness and placement.