Overview
The Oracle Lighting Oculus 5839-504-PSC is a Bi-LED projector headlight set with a satin silver bezel, fitted to the 2018–2026 Jeep Wrangler JL and the 2020–2026 Jeep Gladiator JT. It is a complete headlight replacement with LED projection rated at 3,200 lumens of illumination for visibility in all weather conditions.
The LED source uses less power than factory lamps while giving more light output. The focused beam has a sharp cut-off line that limits glare for other drivers, which matters most on lifted Jeeps, where the light source sits higher and can reach other drivers’ view.
Thermal management uses active and passive cooling. Remote mounted heat sinks and an internal cooling fan work together to keep LED temperatures low for long life.
Key features
- Precision LED projector with a sharp cut-off line for focused light
- 3,200 lumens of illumination
- Halo DRL with over 200 bright white LEDs
- Active and passive cooling through remote mounted heat sinks and an internal fan
- Plug and play into the factory connector, without additional relays or harnesses
- Installs using the original mounting hardware
- Beam angle adjustment tool included
- Satin silver bezel
Lifted Jeep aim and cooling
Lifted Jeeps change how headlights throw light, so aim needs more attention than on stock height. A higher mounting position can put the beam into oncoming traffic when the front end is level. Set the focus on level ground, then check the cutoff line again after any lift or tire change.
LED projectors run hot at the heat sink more than most owners expect, so keep the vents clear of mud and debris. Check the cooling fan and heat sinks during routine service, and look for dust buildup on the fins. On trail rigs, vibration can loosen mounts, so inspect the hardware after rough runs.
- Aim on level ground after any suspension change
- Keep heat sink fins free of mud
- Check mounting hardware after rough trail runs
- Inspect seals for moisture after deep water
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5839-504-PSC |
| Lumens | 3,200 |
| Bezel | Satin silver |
| Halo DRL | Over 200 bright white LEDs |
| Cooling | Remote mounted heat sinks and an internal cooling fan |
| Mounting | Original mounting hardware |
| Wiring | Plug and play into factory connector |
| Included tool | Beam angle adjustment tool |
Vehicle fitment
The fitment covers the 2018–2026 Jeep Wrangler JL, including two-door trims such as Rubicon, Sport and Willys, and four-door Unlimited trims such as Moab, Rubicon, Sahara and High Altitude. It also covers the 2020–2026 Jeep Gladiator JT across its trims. Jeep Wrangler JK, LJ and TJ are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The headlamps mount with the original hardware and plug into the factory connector, with no extra relays or harnesses described. The included beam angle tool is meant for setting focus on lifted Jeeps. Unplug the battery before any wiring work on these lamps.
What’s included
Oculus Bi-LED projector headlights with a satin silver bezel, the Halo DRL and the beam angle adjustment tool.
Not included: Check the package contents against your installation before starting.

















