Overview
The Oracle Lighting ORC5246-001 is a set of LED fog light bulbs rated at 4,000+ Lm, built with Philips Luxeon ZES chips and an adjustable heat sink. It is universal fit, so it is not tied to a specific vehicle year, make, model or trim.
These high-output bulbs are designed to improve nighttime visibility and draw less than half the power of the factory headlight bulb they replace. Check the bulb base and socket against your housing before installing, since the bulb name varies between fog light and headlight use.
Key features
- Philips Luxeon ZES LED chips for higher light output with lower power draw.
- Rated at 4,000+ Lm of light output.
- Chip design that Oracle says dissipates heat well for reliability in harsh environments.
- Internal driver components designed by Samsung in a smaller package.
- Removable, adjustable heat sink that can be reverse installed or mounted outside the headlight back-cap.
Heat management in LED bulbs
LED bulbs make light with semiconductor chips that produce heat, and that heat has to leave the bulb or output and lifespan suffer. A heat sink that can be positioned gives room to move the bulb’s heat away from a tight headlight or fog light housing. Keep vents and airflow paths clear, and avoid covering the heat sink with tape or foam when fitting.
Moisture is the main enemy of an LED bulb in a fog light, since the housing is exposed to spray and splash. Check that the seal around the bulb base is intact and that the connector is dry before reconnecting. Some LED bulbs can flicker on certain vehicles, so test the lights after installation before relying on them in fog.
- Keep the heat sink clear of obstructions
- Check the bulb base seal for cracks
- Confirm the bulb sits fully seated in the socket
- Test for flicker before relying on the lights
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5246-001 |
| Light output | 4,000+ Lm |
| LED chips | Philips Luxeon ZES |
| Driver components | Designed by Samsung |
| Heat sink | Adjustable and removable |
| Power draw | Less than half the power of the factory headlight bulb |
| Fitment type | Universal fit |
Vehicle fitment
The bulbs are universal fit, so no specific vehicle is named. The adjustable heat sink helps with fitting in tight spaces, but the bulb base and socket on your vehicle still need to match.
Because no vehicle is listed, check the bulb base and socket against your fog light or headlight housing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The heat sink can be removed to reverse install the bulb, or mounted outside the headlight back-cap when space is tight. Use fused wiring and check local rules on fog light use on public roads.
What’s included
Check the package contents against your installation plan before starting, including the bulb count and any mounting hardware.













