Overview
The Oracle Lighting ORC5236-001 is an H13 LED headlight bulb conversion kit sold as a pair. It is written for the 2018-2019 Jeep Wrangler JL and rated at 4,000+ Lm per bulb, giving a wide, even blanket of light for night driving.
Each bulb uses Philips Luxeon ZES chips, which deliver high lumen output while drawing less than half the power of a factory headlight bulb. The smaller chips dissipate heat well, which suits harsh environments. Samsung-designed internal drivers sit in a compact package, and the adjustable heat sink is built to reduce fitment problems.
Key features
- 4,000+ Lm output per bulb
- Philips Luxeon ZES chips for high lumen output
- Lower power draw than the factory headlight bulb
- Smaller chips with heat dissipation suited to harsh environments
- Samsung-designed internal drivers in a compact package
- Adjustable heat sink that can be removed to reverse install or mount outside the headlight back-cap
- Pair sold with H13 connectors and compact LED drivers
Before you swap a pair
Headlight bulbs are often replaced in pairs so both sides match. Bulbs of the same type age at similar rates, and a new bulb paired with an old one can show uneven color and output. Swapping both at once keeps the beam pattern balanced from left to right, which matters for oncoming drivers as well as your own view of the road.
A removable heat sink gives options when the back-cap is tight. Test the fit before sealing the housing, because the bulb needs room for the heat sink and clear airflow. Keep the rubber seal and dust cover in place after the swap to limit moisture and grime inside the lamp.
- Clean the lens and reflector before installing new bulbs
- Confirm the H13 base seats fully and locks in place
- Aim the headlights once the new bulbs are in
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5236-001 |
| Bulb type | LED |
| Bulb base type | H13 |
| Quantity | Pair (2 bulbs) |
| Light output | 4,000+ Lm per bulb |
| LED chips | Philips Luxeon ZES |
| Heat sink | Adjustable, removable |
Vehicle fitment
The kit is written for the 2018-2019 Jeep Wrangler JL, and that is the vehicle it is sold for. Confirm the H13 base and headlight housing match before ordering.
Only the 2018-2019 Wrangler JL is covered. Other Wrangler generations, including the 2007-2018 Wrangler JK, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The heat sink can be removed so the bulb can be reverse installed, or mounted outside the headlight back-cap when the back-cap has no room for it. Disconnect the battery before swapping the bulbs.
What’s included
Two H13 LED headlight bulbs, two H13 connectors and two H13 compact LED drivers.













