The third brake light, or center high-mount stop lamp, sits high on the rear of the vehicle and helps following drivers see you braking. This branch of Lighting lists replacement and LED units, bezels, spacers and grommets, many for Jeep Wranglers and full-size trucks. Recon, Putco, Rugged Ridge and Spyder are among the brands. Compare lens color, lighting type and part numbers on each product page, then compare the products below.
Third Brake Lights
Showing 1–12 of 34 resultsSorted by popularity
-
Third Brake Lights
Spyder Auto Group XTune 3rd Brake Light (Black) – 9037504
- Fits 2014–2016 Chevrolet Silverado and GMC Sierra 1500, plus 2015–2016 2500 HD and 3500 HD models
- Black LED third brake light, a direct replacement for stock lights
- Not compatible with a backup camera.
- Part number S/L9037504
SKU: S/L9037504 -
-
-
-
Third Brake Lights
Anzo Third Brake Light Assembly – 531083
- Fits 1997–2003 Ford F-150 (Base, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- Also fits 1999–2003 Ford F-150 Lightning and 2004 Ford F-150 Heritage
- LED light source with a smoke lens
- D.O.T. compliant to S.A.E. standards
- Anzo part number ANZ531083
SKU: ANZ531083 -
Third Brake Lights
Anzo Third Brake Light Assembly – 531079
- Fits 1994–2001 Dodge Ram 1500 and 1994–2002 Dodge Ram 2500 and 3500 per the manufacturer fitment list
- LED third brake light assembly with smoke lens
- Part number ANZ531079 from Anzo’s B-Series line
- D.O.T. compliant to S.A.E. standards
SKU: ANZ531079 -
Third Brake Lights
4 Wheel Parts Factory Bronco 3rd Brake Light Bracket – 61969W
- For the 2021–2026 Ford Bronco, two-door and four-door
- Moves the factory third brake light up to clear a 37-inch spare tire
- Works with or without the 4WP Spare Tire Relocation Bracket
- Direct fit light bracket
SKU: 4WP61969W -
-
Third Brake Lights
Rugged Ridge High Mount LED 3rd Brake Light – 11585.05
- Six super-bright red LEDs in a high mount third brake light
- Designed to work with the stock high mount brake light bracket
- Bolt-on installation with durable, water resistant housing
- Fits listed 2007–2018 Jeep Wrangler JK models
- Part number 11585.05, UPC 804314293086
SKU: RUG11585.05 -
Third Brake Lights
Rampage Universal Third Brake Light Bracket – 86615
- Rampage universal third brake light bracket, part number 86615
- Uses an oval LED light to add a third brake light to any tire carrier
- Heavy gauge powder coated steel with textured black finish
- Slotted holes adjust up and down and in and out
- UPC 873563005283
SKU: RPP86615
What the third brake light is for
A center high-mount stop lamp is a federally required fixture on modern passenger vehicles in the United States. Mounted at about eye level for drivers behind you, it catches attention that low taillights can miss, particularly when a tall truck or Jeep sits in front. Items in this category replace a cracked or faded unit, upgrade to LED, or add cargo lighting on some truck models.
Types of units
- Stock-style replacement lamps: red lens housings that use a bulb and match factory fit.
- LED third brake lights: use LED arrays that light quickly and last long, with lens colors such as smoke, clear or red.
- LED with cargo lights: some truck units add white LEDs to illuminate the bed.
- Mounts and extras: spacers, grommets and light rings for tailgate-mounted or spare-tire installations.
What to compare
- Fitment: shape and mounting differ by vehicle, so look for your year and model, such as a specific Wrangler generation or Ford truck range.
- Lens color: smoked lenses look darker but should still show a bright red light when lit.
- Brightness and output: look at the number and type of LEDs, and rely on the maker's stated specifications.
- Weather sealing: waterproof housings and connectors suit off-road use.
- Wiring: plug-and-play versus splice-in installation.
Installation and legal notes
Disconnect the battery if you will work on wiring, confirm the new unit lights with the brake pedal pressed, and check the seal so water cannot enter the cargo area. Replacement should keep the lamp red and visible as required for a brake light. Equipment rules for lens color and brightness vary by state, so check local regulations. On vehicles with a spare tire, tailgate carrier or rack, make sure the mount does not block the light.
Install details can make a difference. On vehicles such as the Wrangler, the lamp may be mounted on the tailgate, spare tire carrier or a rear roll bar, and wiring passes through the hinge or a flexible loom, so inspect that wiring for breaks if a lamp fails intermittently. Grommets and spacers keep the unit aligned with the mounting surface and protect wiring from chafing, and a ring or spacer can restore the correct fit when a spare tire or carrier is changed.
When upgrading to LED, consider how the vehicle's electrical system responds. Some vehicles have bulb-out monitoring that interprets the low current of an LED as a failed bulb, which may require a load resistor or a model made to be compatible. Choose a unit with a sealed housing and gasket, since moisture in a lamp shortens its life. Check the brake light works every time you load a rack or carrier that could block the view, and keep the lens clean, because dirt cuts visibility. A quick check with a helper pressing the brake pedal confirms operation.
Compatibility
Confirm fitment for your exact year, make and model, including bed or tailgate type, and check the manufacturer's specifications before choosing a product below.
Popular Third Brake Lights brands
- Recon (11)
- Anzo (4)
- Spyder Auto Group (4)
- Rugged Ridge (3)
- Putco (3)
- 4 Wheel Parts (1)
- Rancho (1)
- Fab Fours (1)
- Rock Slide Engineering (1)
- JcrOffroad (1)
- Omix-Ada (1)
- Jeep (1)
Third Brake Lights FAQ
Are third brake lights required?
Passenger vehicles sold in the United States from the late 1980s generally have a center high-mount stop lamp as standard equipment. Equipment and inspection rules vary by state, so check local requirements before changing the unit.
Can I replace a third brake light with an LED version?
Often yes, if the LED unit is made for your vehicle. Choose a fit-specific model and confirm wiring compatibility. Plug-and-play versions simplify installation, and the light should still show a clearly visible red when braking.
Why is my third brake light not working?
Common causes include a burned-out bulb or failed LED, a bad connector, damaged wiring where it passes through the tailgate or hatch, or a blown fuse. A mechanic can trace the circuit with a test light or multimeter.
Do smoked third brake lights meet the rules?
Smoked lenses are common, but the lamp must still produce a bright, clearly red light when lit. Rules vary by state, so check local regulations and the manufacturer's information about compliance.











