Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Leveling Kits
Showing 25–36 of 170 resultsSorted by popularity
-
Coil Spring Spacer
Skyjacker 2″ Suspension Lift Kit with Front Aluminum Spacers – FB2120MSPB
- Skyjacker 2 inch lift kit with front aluminum spacers, part number FB2120MSPB
- For the 2021–2026 Ford Bronco Badlands, Wildtrak and First Edition
- Keeps factory performance struts and adds two-piece aluminum front spacers
- Clearance for up to 37 inch tires; shocks not included
SKU: SKYFB2120MSPB -
-
Coil Spring Spacer
Rubicon Express 2″ Spacer System with Twin Tube Shocks – JT7134T
- Rubicon Express JT7134T 2-inch front spacer system with twin tube shocks
- Fits 2020–2026 Jeep Gladiator JT models
- Steel coil spacers, sway bar drops and bump stop extensions
- Keeps the factory springs and dampers
SKU: R/EJT7134T -
Leveling Kits
Rubicon Express 2″ Leveling Kit with Shock Extensions – JT7134E
- Rubicon Express JT7134E 2-inch leveling kit with shock extensions for the Jeep Gladiator JT
- Fits the 2020–2026 Jeep Gladiator (JT)
- Steel coil spacers, sway bar drops and bump stop extensions
- Keeps the factory springs and dampers; shocks not included
SKU: R/EJT7134E -
Coil Spring Spacer
RT Off-Road 1.75 Inch Coil Spring Spacer Lift Kit – RT21037
- RT Off-Road 1.75-inch coil spring spacer lift kit, front and rear
- Fits 1999–2004 Jeep Grand Cherokee (WJ) in Laredo, Limited, Overland, Special Edition and Sport trims
- Includes spacers and bumpstop extensions
- Lift height 1.75 inches
SKU: RTORT21037 -
-
Leveling Kits
Rough Country 3.5 Inch Ford Leveling Kit – 50000
- 3.5 inch Ford Ranger suspension lift kit for 2019–2023 Ranger
- Tubular upper control arms and differential drop brackets
- Front strut spacers, laser cut and powder coated black
- Lift blocks and U-bolts for the rear
- Lifetime replacement warranty
SKU: R/C50000 -
-
Leveling Kits
Rough Country 2.5″ Ram Front Leveling Strut Kit – 501022
- 2.5 inch front leveling strut kit for 2006–2008 Dodge and Ram 1500
- N3 struts with chrome-plated piston rods and leak-proof seals
- Full strut replacement with no spring compression
- Variable dampening system tuned to OEM specifications
- Gray finish
SKU: R/C501022
What a leveling kit does
Many pickups and SUVs leave the factory with the front slightly lower than the rear to accommodate a load in the bed. A leveling kit raises the front end, typically by roughly one to three inches, so the vehicle sits level and has room for slightly larger tires. It is a lighter, simpler option than a full lift kit and usually keeps the factory suspension geometry.
Types of leveling kits
The method depends on your front suspension design.
- Coil spring spacers sit on top of or under the coil spring on solid-axle or coil-sprung trucks and add ride height at a low cost.
- Strut spacers lift the strut assembly on independent front suspension vehicles that use coil-over struts.
- Torsion bar keys replace the factory key so the torsion bar can be rotated higher, common on many GM and Ford trucks.
- Complete suspension leveling kits pair new shocks or coil-overs, such as Bilstein 6112 units, with the lift hardware for a matched setup.
- Rear spacers and load-level kits restore height at the back where a vehicle sags.
Key points to compare
Check the lift height listed for the front and whether the kit is front only. Look at whether the kit includes extended-length shocks or recommends them, since the factory shock may run out of travel as it is stretched. Spacer material, finish and included hardware matter for durability and corrosion resistance.
Consider tire size. Some kits list a maximum tire size and wheel backspacing, and one torsion bar key set in the sample listings states a 33 inch maximum tire, so read each description for limits.
Note that a leveling kit changes ride and handling slightly. Raised front ends can affect headlight aim, driveshaft angles and CV axle angles on some vehicles.
Installation and alignment
Suspension work involves compressed springs and load-bearing parts. A professional installation is recommended unless you have the proper spring compressors, jack stands and experience. Torque all fasteners to the manufacturer's specifications.
A front alignment is needed after any change in ride height, and you should re-check headlight aim. Lift height, tire size and equipment rules vary by state, so check your local regulations before modifying ride height.
Pairing a leveling kit with tires and shocks
A leveling kit is often the first step in a larger plan, so think about what comes next. Added front height gives room for a modest increase in tire diameter, but check clearance at full steering lock and full compression, where tires can rub on the fender liner, control arms or sway bar. Measure the available space before buying tires instead of assuming a kit alone will clear them.
- Longer front shocks restore full travel if the kit stretches the factory shock close to its limit
- Check that brake lines and ABS wires have enough slack at full droop
- Torsion bar adjustments can be reset later, but never exceed the maximum the vehicle manufacturer allows
- Larger tires change gearing, speedometer reading and braking distance
- Heavier wheels and tires add steering and suspension wear
One common mistake is leveling a truck that regularly carries a heavy bed load or a camper. Because the rear sags under that weight, the front may end up looking high when the vehicle is empty, and handling can feel light. If you tow or haul, test the vehicle loaded and consider rear helper springs or load-level spacers to keep the stance balanced.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- 325/60R20 in Inches: Tire Size Math Made Simple
325/60R20 is 35.4 inches tall and 12.8 wide. The tire size formula, a chart of 24 off-road sizes in inches, speedometer error and regearing…
Popular Leveling Kits brands
- ReadyLift (29)
- Rough Country (28)
- Rubicon Express (12)
- Tuff Country (12)
- Bilstein (9)
- Pro Comp Suspension (9)
- Fabtech (9)
- Trail Master (7)
- Rancho (7)
- TeraFlex (7)
- ICON Vehicle Dynamics (6)
- Daystar (6)
Shop Leveling Kits by type
- Coil Spring Spacer (61)
- Torsion Bar Key (9)
- Strut Spacers (3)
Leveling Kits FAQ
How much can I level my truck?
Typical kits raise the front about one to three inches, but the right amount depends on your suspension design and tires. Staying within the manufacturer's stated lift height helps preserve CV axle and steering angles. Check the manufacturer's stated lift height and your suspension type, since the amount depends on whether you use spacers, keys or a full kit.
Will a leveling kit hurt ride quality?
Spacers generally keep the factory springs and shocks, so the ride feels similar, though the shocks sit closer to full extension. Pairing the lift with correctly sized shocks usually gives the best result.
Do I need an alignment after leveling?
Yes. Changing ride height alters camber, caster and toe, so schedule an alignment right after installation to protect tires and steering feel. The exact figure depends on your suspension type and tires.
Is a leveling kit the same as a lift kit?
No. A leveling kit mainly raises the front to match the rear, while a lift kit raises the whole vehicle and often includes new springs, shocks and control arms for added ground clearance.











