Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Leveling Kits
Showing 85–96 of 170 resultsSorted by popularity
-
-
-
-
-
-
-
-
Leveling Kits
Rancho 2 Inch Level It System – RS66304R9
- Front leveling kit with two Rancho RS9000XL leveling struts
- Lifts the front 2 inch and includes two sway bar spacers
- Fits 2007–2018 Chevrolet Silverado 1500 and GMC Sierra 1500
- Fits the 2019 Silverado 1500 LD
- Shocks included, front lift only
SKU: RANRS66304R9 -
Leveling Kits
Pro Comp Nitro 3 Inch Leveling Lift Kit – 63162K
- Fits the 2015–2022 Chevrolet Colorado and 2015–2022 GMC Canyon
- 3-inch front lift with strut spacers
- Rear lift blocks and U-bolts, where applicable
- Front lift range of 1.5 to 2.5 inches depending on the application
- Part number EXP63162K (63162K)
SKU: EXP63162K -
Leveling Kits
Pro Comp Nitro 2.5 Inch Leveling Lift Kit with Rear Blocks – 62206K
- Pro Comp Nitro leveling kit, part 62206K, 2.5 inch front lift
- Front lift by strut spacers and torsion keys, rear by lift blocks and U-bolts
- Black metal and aluminum spacer components
- Track bar drop not included
SKU: EXP62206K -
Leveling Kits
Pro Comp Nitro 2.5 Inch Leveling Lift Kit – 63156K
- Fits the 2020–2026 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD
- 2.5-inch front lift with forged chromoly torsion keys
- Clearance for wheels and tires up to 33 inches
- Longer shocks recommended
- Part number EXP63156K (63156K)
SKU: EXP63156K
What a leveling kit does
Many pickups and SUVs leave the factory with the front slightly lower than the rear to accommodate a load in the bed. A leveling kit raises the front end, typically by roughly one to three inches, so the vehicle sits level and has room for slightly larger tires. It is a lighter, simpler option than a full lift kit and usually keeps the factory suspension geometry.
Types of leveling kits
The method depends on your front suspension design.
- Coil spring spacers sit on top of or under the coil spring on solid-axle or coil-sprung trucks and add ride height at a low cost.
- Strut spacers lift the strut assembly on independent front suspension vehicles that use coil-over struts.
- Torsion bar keys replace the factory key so the torsion bar can be rotated higher, common on many GM and Ford trucks.
- Complete suspension leveling kits pair new shocks or coil-overs, such as Bilstein 6112 units, with the lift hardware for a matched setup.
- Rear spacers and load-level kits restore height at the back where a vehicle sags.
Key points to compare
Check the lift height listed for the front and whether the kit is front only. Look at whether the kit includes extended-length shocks or recommends them, since the factory shock may run out of travel as it is stretched. Spacer material, finish and included hardware matter for durability and corrosion resistance.
Consider tire size. Some kits list a maximum tire size and wheel backspacing, and one torsion bar key set in the sample listings states a 33 inch maximum tire, so read each description for limits.
Note that a leveling kit changes ride and handling slightly. Raised front ends can affect headlight aim, driveshaft angles and CV axle angles on some vehicles.
Installation and alignment
Suspension work involves compressed springs and load-bearing parts. A professional installation is recommended unless you have the proper spring compressors, jack stands and experience. Torque all fasteners to the manufacturer's specifications.
A front alignment is needed after any change in ride height, and you should re-check headlight aim. Lift height, tire size and equipment rules vary by state, so check your local regulations before modifying ride height.
Pairing a leveling kit with tires and shocks
A leveling kit is often the first step in a larger plan, so think about what comes next. Added front height gives room for a modest increase in tire diameter, but check clearance at full steering lock and full compression, where tires can rub on the fender liner, control arms or sway bar. Measure the available space before buying tires instead of assuming a kit alone will clear them.
- Longer front shocks restore full travel if the kit stretches the factory shock close to its limit
- Check that brake lines and ABS wires have enough slack at full droop
- Torsion bar adjustments can be reset later, but never exceed the maximum the vehicle manufacturer allows
- Larger tires change gearing, speedometer reading and braking distance
- Heavier wheels and tires add steering and suspension wear
One common mistake is leveling a truck that regularly carries a heavy bed load or a camper. Because the rear sags under that weight, the front may end up looking high when the vehicle is empty, and handling can feel light. If you tow or haul, test the vehicle loaded and consider rear helper springs or load-level spacers to keep the stance balanced.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- 325/60R20 in Inches: Tire Size Math Made Simple
325/60R20 is 35.4 inches tall and 12.8 wide. The tire size formula, a chart of 24 off-road sizes in inches, speedometer error and regearing…
Popular Leveling Kits brands
- ReadyLift (29)
- Rough Country (28)
- Rubicon Express (12)
- Tuff Country (12)
- Bilstein (9)
- Pro Comp Suspension (9)
- Fabtech (9)
- Trail Master (7)
- Rancho (7)
- TeraFlex (7)
- ICON Vehicle Dynamics (6)
- Daystar (6)
Shop Leveling Kits by type
- Coil Spring Spacer (61)
- Torsion Bar Key (9)
- Strut Spacers (3)
Leveling Kits FAQ
How much can I level my truck?
Typical kits raise the front about one to three inches, but the right amount depends on your suspension design and tires. Staying within the manufacturer's stated lift height helps preserve CV axle and steering angles. Check the manufacturer's stated lift height and your suspension type, since the amount depends on whether you use spacers, keys or a full kit.
Will a leveling kit hurt ride quality?
Spacers generally keep the factory springs and shocks, so the ride feels similar, though the shocks sit closer to full extension. Pairing the lift with correctly sized shocks usually gives the best result.
Do I need an alignment after leveling?
Yes. Changing ride height alters camber, caster and toe, so schedule an alignment right after installation to protect tires and steering feel. The exact figure depends on your suspension type and tires.
Is a leveling kit the same as a lift kit?
No. A leveling kit mainly raises the front to match the rear, while a lift kit raises the whole vehicle and often includes new springs, shocks and control arms for added ground clearance.













