Select your vehicle

ReadyLift 2.5 Inch Front Leveling Kit with Tubular Control Arms – 66-1026

ReadyLift

$559.76In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 20, 2026 1:50 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ReadyLift 2.5 in. front leveling kit with tubular upper control arms, part number RDY66-1026
  • Steel strut spacers that mount on top of the strut
  • Custom bump stop brackets to limit downward suspension travel
  • Direct fit for 2006 to 2018 Ram 1500 models

Description

Overview

The ReadyLift 2.5 in. Front Leveling Kit with Tubular Control Arms, part number RDY66-1026, is a front leveling kit for the Ram 1500. It raises the front 2.5 inches to match the rear, using steel strut spacers, and includes tubular upper control arms. It is built to fit 2006 to 2018 Ram 1500 models in several trims.

The strut spacers mount on top of the strut instead of compressing the spring. This design, called Smart Strut Technology, avoids the spring compression that urethane spacer kits use, which can deteriorate over time. Custom bump stop brackets are included to limit downward suspension travel, which can help reduce premature CV joint wear.

The tubular upper control arms address a known problem where the factory ball joint separates from the stock control arm when a Ram is leveled. The arms allow the truck to be leveled without that issue. The kit is made in the U.S.A.

The 2.5 inch leveling kit fits 2006 to 2016 Ram 1500 4WD trucks, and the fitment also covers 2011 to 2018 models. Confirm the year and drive type before ordering.

Key features

  • 2.5 in. front lift
  • Steel strut spacers that mount on top of the strut
  • Tubular upper control arms included
  • Custom bump stop brackets
  • Black finish
  • Made in the U.S.A.

Leveling a Ram’s front end

Raising the front of a Ram changes the angles of the control arms, the tie rods and the track bar. Those angles shift the front axle and steering geometry, so the front end usually needs an alignment after leveling. Strut spacers alone do not change the arm angles, which is why the control arms and bump stops matter as part of the same setup.

Leveling kits put more load on ball joints and CV joints at full droop. Inspect the boots and joints during each service, and look for clicking, grease leaks or play in the front end. Keeping the bump stops in good condition limits how far the suspension can drop, and that helps protect the joints over time.

  • Check ball joints and boots at each oil change
  • Inspect CV boots for cracks or grease leaks
  • Schedule a front alignment after installation
  • Watch for wander or pull on the highway

Specifications

Brand ReadyLift
Part number RDY66-1026
Front lift height 2.5 in.
Front lift method Steel strut spacers
Rear lift Front lift only
Bump stops Relocation bracket
Track bar drop Not included
Finish Black
Fit Direct fit

Vehicle fitment

It is a direct fit for 2006 to 2010 Dodge Ram 1500 models, including Laramie, SLT, ST, SXT, Sport, TRX and TRX4, and for 2011 to 2018 Ram 1500 models, including Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman and Tradesman HD.

Ram 2500 and 3500 models, and Ram 1500 years outside 2006 to 2018, are not in this list. Confirm your vehicle’s year, model, trim and drive type before ordering.

Installation notes

The strut spacers and bump stop brackets are part of the kit. A track bar drop is not included, so check whether your setup needs one before installing.

What’s included

The 2.5 in. steel strut spacers, tubular upper control arms, custom bump stop brackets and black finish. Not included: a track bar drop.

Fitment

VehicleYearsTrims
Dodge Ram 15002006–2010Laramie, SLT, ST, SXT, Sport, TRX, TRX4
Ram 15002011–2018Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman, Tradesman HD

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the ReadyLift 66-1026 fit a 2014 Ram 1500?

Yes. It fits 2011 to 2018 Ram 1500 models, so a 2014 truck falls within that range. The 2006 to 2016 entries cover 4WD trucks, so confirm the drive type before ordering.

Does the kit include a track bar drop?

No. The kit does not include a track bar drop, so check whether your setup needs one before installing the kit.

Why are the control arms included?

The tubular upper control arms address a problem where the factory ball joint can separate from the stock control arm when the truck is leveled. They are sold with the kit for that reason.

Do leveling kits affect tire wear?

They can. A raised front changes the tire angle, so uneven wear on the inner or outer edges is a common sign of misalignment. Rotate tires on schedule and recheck the front alignment after any change in height or tire size.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon