Overview
The ReadyLift 66-1080 is a torsion key front leveling kit that adjusts from 1.5 to 2.25 inch of front lift. It fits the 2004–2009 Dodge Durango and the 2007–2009 Chrysler Aspen, and it levels the front of the vehicle with the rear.
Torsion keys sit in the crossmember and set the preload on the torsion bars, so turning the adjuster changes the front height. The kit gives clearance for tires up to 33 inch on the Durango. It is a leveling kit, so the rear is not lifted. Keys must be set at the same height on both sides or the truck will sit out of level, so each adjustment is made on both sides together.
Key features
- Forged torsion keys, which ReadyLift says are 25% stronger than OEM
- Keys grip the flat of the torsion bar for a tighter fit
- CNC-machined adjuster bolt pockets for accurate adjustment
- 10.9 grade metric hardware for proper bolt seating
- Adjustable from 1.5 to 2.25 inch of front lift
Setting torsion key height
Torsion keys change front height by altering the preload on the torsion bars, so small turns of the adjuster have a noticeable effect. Setting height in steps and measuring after each change keeps the truck from sitting crooked. Mark the starting position on each key before loosening so both sides can be returned to matching settings if needed.
Because the rear stays at factory height, the front is usually set to match the rear’s stance. Heavier loads such as a trailer or cargo can change the reading, so measure with the truck empty and at normal tire pressure. Replace keys or bushings that show cracks or wear, and recheck alignment once the front is at its final height.
- Mark key positions before loosening
- Adjust both sides in matching steps
- Measure with the truck unloaded
- Check the keys for cracks or wear
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-1080 |
| Front lift height | 1.5 to 2.25 inch, adjustable |
| Lift method | Torsion keys |
| Material | Steel |
| Finish | Black |
| Rear lift | None, front lift only |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
Vehicle fitment
It fits the 2004–2009 Dodge Durango and the 2007–2009 Chrysler Aspen, in the Limited, Limited Hybrid, Adventurer, SE, SLT, ST and SXT trims.
Other Durango generations and the Jeep Grand Cherokee are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing torsion keys requires releasing the torsion bar preload, which is done with a torsion key unloading tool. Set the keys evenly on both sides so the truck sits level. The adjustment range lets the final front height be set during installation. The forged keys are made to work with the factory torsion bars without adding pressure to stock suspension components.









