Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
This category covers shock absorbers and the parts that support them: strut assemblies, mounts, boots, rebuild kits, extension brackets, relocation brackets and remote reservoir mount kits. It suits Jeep, truck, SUV and van owners, from stock-height daily drivers to modified trail rigs. Brands include Pro Comp Suspension, Bilstein, ICON Vehicle Dynamics and FOX. Open a product page for specifications, then compare the products below.

Shocks decide how your rig rides long after the lift is bolted on. The right damper keeps tires on the ground over rocks and washboard and stops the body from wallowing on the highway. This section covers complete shocks and struts plus the brackets, boots and service parts that keep them working.
Most listings are complete shocks, sorted by vehicle and lift range. Struts come as bare dampers or loaded assemblies for independent fronts. The smaller groups solve fit and service problems: extensions and relocation brackets correct length after a lift, hoops add a second shock per corner, reservoir kits hold remote cans, and rebuild kits, bearings and oil keep serviceable shocks going for years.
Shop shocks and shock parts
Popular shocks and accessories
-
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 929505B
- PRO-X twin tube shock, 29.8 in extended and 17.3 in collapsed length
- Gas charged and nitrogen stabilized, with 10 stage velocity sensitive valving
- 5/8 in chrome hardened shaft and 1-3/8 in nylon banded piston
- Fits Chevrolet Avalanche, Silverado and GMC Sierra trucks and the 2013-2021 Ram 3500
- Sold individually; shock boot sold separately
SKU: EXP929505B -
-
Shock Absorbers & Shock Accessories
Pro Comp 2.5″ PRO-VST Rear Shocks – 51039BX-2
- Gas charged monotube rear shock with a 2.5 inch body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning for on-road ride and off-road performance
- Fits 2007 to 2021 Chevrolet Silverado 1500
- Part number 51039BX-2
SKU: EXP51039BX-2 -
-
Suspension Strut Assembly
Rough Country 2 Inch Front Leveling Strut Kit – 501083
- Rough Country 2 inch front leveling strut kit for 2004 to 2008 Ford F-150 trucks
- Chrome plated piston rod, leak-proof piston seal and variable dampening
- Replaces the factory strut, with no strut disassembly required
- Part number 501083, unfinished
SKU: R/C501083 -
Shock Absorber Mount
Artec Industries Ultimate Coil Bracket Kit – BR1111
- Artec Industries Ultimate Coil Bracket Kit, part number BR1111
- Bracket design with easier grease fitting access and bottom protection on lower link brackets
- No specific vehicle is named; confirm the mounting points before fitting
SKU: A/IBR1111 -
Suspension Strut Assembly
Bilstein B6 Suspension Strut Assembly – 22-282743
- Rear left B6 Series suspension strut, part number BIL22-282743
- Fits the 2008–2013 Toyota Highlander 2WD models in Base, Limited, Plus, SE and Sport trims
- OEM top and bottom mounts with OEM body diameter
- Gas-charged monotube design
- Black paint finish
SKU: BIL22-282743
Shock sizing and mounting reference
Use these checks to confirm a shock or bracket will fit before you order. Lengths are measured center to center between the mounting points.
How to measure for shocks
- Measure mount to mount with the axle at full droop (extended length)
- Measure again with the suspension on the bump stops (collapsed length)
- Pick a shock whose collapsed length is a bit shorter than the bump measurement
- Its extended length should reach droop, or add limit straps to protect it
- Travel equals extended length minus collapsed length
- Measure each corner; front and rear lengths are rarely the same
Body diameter and service
| Typical use | Rebuild kit | |
|---|---|---|
| 2.0" | Stock height to mid lifts | 2.0 IFP kit |
| 2.5" | Lifted trucks, fast trail use | 2.5 piggyback, remote, bypass |
| 3.0" | Heavy rigs, desert running | 3.0 kit |
Example shock dimensions
| Shock | Pro Comp PRO-X 929505B |
|---|---|
| Extended length | 29.8" |
| Collapsed length | 17.3" |
| Travel | 12.5" |
| Mounts | Loop upper and loop lower |
| Design | Twin tube, nitrogen charged |
Mount styles
| What it looks like | Notes | |
|---|---|---|
| Loop (eye) | Bushed ring, bolt passes through | Most common on solid axles |
| Stem | Threaded stud with bushings | Tighten until bushings just swell |
| Bar pin | Flat pin with two bolt holes | Common on struts and lower mounts |
| Spherical bearing | Metal ball in the eye | Used on race shocks; match bore size |
Which accessory fixes what
| Shock too short after a small lift | Extension bracket |
|---|---|
| Shock hits a mount or frame | Relocation bracket (weld-on drop) |
| Want two shocks per corner | Multi-shock hoop or bracket |
| Remote reservoir needs a home | Reservoir clamp or mounting block |
| Shaft getting chipped or dirty | Shock boot or armor |
| Rebuildable shock fading | Rebuild kit and fresh shock oil |
Rebuilding a gas-charged shock means recharging it with nitrogen, which needs a fill tool. Some fitting kits also differ by option, such as Land Cruiser 200 models with and without KDSS.
All Shock Absorbers & Shock Accessories 902 parts
-
-
-
Shock Absorbers & Shock Accessories
Tuff Country SX6000 Shock Absorber – 62302
- Twin-tube SX6000 shock absorber with cellular gas to limit fading
- Multi-stage valving for a smooth, controlled ride
- Polyurethane bushings
- Sized for 4-inch lift on Ram, Ford, Jeep and Toyota trucks
- Part number T/C62302
SKU: T/C62302 -
Shock Absorbers & Shock Accessories
Tuff Country SX6000 Shock Absorber – 62267
- Twin-tube SX6000 shock absorber with cellular gas charge
- Multi-stage valving for a smooth, controlled ride
- Polyurethane bushings and multi-fit hardware pack included
- Two required per vehicle
- Designed for a 0 inch lift or drop
- Part number T/C62267
SKU: T/C62267 -
-
-
Shock Absorbers & Shock Accessories
Trail Master Nitrogen Gas Twin Tube Shock Absorber – TM73265006
- Rear nitrogen twin tube shock for Jeep Wrangler JK and Cherokee XJ
- Designed for a 3 to 4 inch lift on JK and 4.5 inch on XJ
- 10-stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod; shock boot a separate part
SKU: T/MTM73265006 -
Shock Absorbers & Shock Accessories
Trail Master Nitrogen Gas Twin Tube Shock Absorber – TM73265005
- Front nitrogen twin tube shock for Jeep Wrangler JK, 2- and 4-door
- Designed for a 3 to 4 inch lift
- 10-stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod; shock boot a separate part
SKU: T/MTM73265005
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.


























