Overview
The ReadyLift 66-1020 is a 2.5 inch front leveling kit for the 2006–2010 Dodge Ram 1500 and the 2011–2012 Ram 1500. It raises the front with steel strut spacers and levels the front of the truck with the rear.
The spacers mount on top of the strut, so the springs are not compressed and the spring rate is not changed. Spacers that sit above the spring avoid the spring compression and deterioration that urethane spacer kits can cause over time. The kit includes custom bump stop brackets, which limit downward suspension travel and help prevent premature CV joint wear.
Key features
- 2.5 inch front lift through steel strut spacers
- Smart Strut Technology sits on top of the strut
- Custom bump stop relocation brackets to limit downward travel
- Designed to protect the CV joints from excess suspension travel
- Black steel finish
CV joints and travel limits
Bump stops limit how far the suspension can drop, which affects how hard the CV joints work at full extension. Relocating the bump stops with brackets keeps that limit in a position that suits the raised front. The brackets should be checked for clearance and secure fastening after installation, since a loose bracket can allow more travel than intended.
Strut-top spacers keep the factory spring working as designed, so the main maintenance focus is on the suspension joints and boots. Inspect CV boots for splits, check ball joints for play, and look for grease leaks at the axle. Recheck bracket fasteners after the first few trips and after any off-road use.
- Check bump stop brackets for clearance
- Inspect CV boots for splits
- Test ball joints for play
- Recheck bracket bolts after early trips
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-1020 |
| Front lift height | 2.5 inch |
| Lift method | Strut spacers |
| Spacer material | Steel |
| Bump stops | Relocation bracket |
| Type | Metal |
| Finish | Black |
| Rear lift | None, front lift only |
| Track bar drop | Not included |
Vehicle fitment
It fits the 2006–2010 Dodge Ram 1500 in its trims, including Laramie, SLT, ST, SXT, Sport, TRX and TRX4, and the 2011–2012 Ram 1500 across its trims.
Ram 1500 model years after 2012 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit requires the bump stop brackets to be installed to limit downward travel, which protects the CV joints from excess suspension travel. The spacers are fitted on top of the factory struts.
What’s included
The steel strut spacers and the bump stop relocation brackets, along with the hardware needed for installation.









