Overview
It is a 1.5-inch leveling kit for the 2019–2026 Ram 1500, including the TRX and TRX Launch Edition. It levels the front of the truck with the rear, which is needed because these trucks leave the factory with rake that puts the rear higher than the front.
The kit uses a two-piece preload spacer that fits inside the strut. This design allows easier installation and better articulation on and off road while keeping factory-like geometry. The kit includes rear coil spacers and four sensor relocation brackets. It provides enough clearance for 38 inch tires with appropriate wheel backspacing. Because the geometry stays close to factory, handling stays closer to stock than with a basic spacer kit. It is not a full lift.
Key features
- Two-piece pre-load spacer that sits inside the strut
- Rear coil spacers for the rear of the truck
- Four sensor relocation brackets
- Clearance for 38 inch tires with appropriate wheel backspacing
- Limited lifetime replacement warranty against manufacturer defects
Level stance without a full lift
A leveling kit changes the front height only, which keeps the factory suspension geometry close to stock. Owners who want a level stance and room for larger tires often choose this approach because the rest of the suspension stays in its original configuration. It is a different job from a full lift.
Two-piece preload spacers work inside the strut, so the spring stays in place while the front height changes. Strut compressor work is needed to reach the spacer, and the sensor brackets should be placed carefully so the sensors keep reading correctly. Rear coil spacers are part of the kit for matching the rear height.
After installation, check the front and rear height together and recheck tire clearance at full steering lock. Inspect the sensor wiring and brackets after the first few drives, and look for rubbing on the inner fender when the suspension compresses over bumps.
- Check sensor wiring after installation
- Confirm rear height matches front
- Recheck tire clearance at full lock
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C31300 |
| Front lift height | 1.5 inch |
| Lift method | Strut spacers (two-piece pre-load spacer) |
| Spacer material | Steel |
| Rear components | Coil spacers |
| Shock relocation bracket | Not applicable; four sensor relocation brackets included |
| Finish | Black |
| Track bar drop | Not included |
| Bump stops | None |
Vehicle fitment
It fits the 2019–2026 Ram 1500 in the Big Horn, Laramie, Laramie Longhorn, Limited, Longhorn, Lone Star, Rebel, Tradesman, TRX and TRX Launch Edition trims.
Ram 1500 model years before 2019 and the 2023 and later trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rough Country says installation requires a strut compressor and takes an estimated 3 to 4 hours. The kit can be installed at home with standard tools.
What’s included
The full kit includes the two-piece pre-load spacers, the rear coil spacers and the four sensor relocation brackets.














