Overview
The Rough Country 2 Inch Ford Leveling Lift Kit (part number R/C58630) is an aluminum front leveling spacer that gives 2 inches of front lift on the 2021–2026 Ford F-150, leveling the front with the rear.
The spacer is machined from billet T6061 aluminum, a material chosen for corrosion resistance. It uses a driver-side and passenger-side pattern so it clears the upper control arm and the strut.
Key features
- 2-inch front lift from strut spacers
- Billet T6061 aluminum construction
- Driver and passenger side pattern for upper control arm clearance
- 100 percent bolt-on installation
- The kit accommodates tires up to 33 inches.
- Polished finish
Aluminum spacer considerations
Aluminum strut spacers add height at the top of the strut, where they push against the mounting plate. Billet aluminum is machined to a tight shape, which helps the spacer seat cleanly. Its corrosion resistance matters on trucks driven over salted roads, though any aluminum part can gall or pit if the fasteners are installed without anti-seize.
After installation, check that the upper control arm moves freely through full travel and that nothing rubs the tire or fender liner at full steering lock. Strut mounts, shocks and track bar geometry all change with a front lift, so the wheel alignment should not be skipped.
- Use anti-seize on aluminum-to-steel fasteners
- Check fender liner clearance at full lock
- Recheck torque after the first few drives
- Inspect upper control arm bushings for wear
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C58630 |
| Front lift | 2 inches |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks and U-bolts |
| Material | Aluminum |
| Finish | Polished |
| Track bar drop | Not included |
| Bump stops | None |
| Shock relocation bracket | Not applicable |
| Maximum tire size | 33 inches |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2021–2026 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL and XLT models.
The 2009–2020 F-150 is not on this list, so it is not covered by this spacer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on work. Check the front alignment once the spacers are in, and confirm that the rear blocks and U-bolts fit the rear springs.
The installation is 100 percent bolt-on. Because the spacer sits at the top of the strut, check that the upper control arm clears it through its full travel once it is installed.
The driver-side and passenger-side pattern lets each spacer clear its upper control arm. The billet T6061 aluminum is designed for corrosion resistance, which matters on a truck exposed to rain and road salt.
What’s included
The aluminum strut spacers and the rear lift blocks with U-bolts. The track bar drop is not included in this set.









