Overview
The ReadyLift 66-2930 is a 3-inch front leveling kit for the 2019–2021 Ford Ranger in XL, XLT and Lariat trims. It is designed to remove some of the exaggerated rake the Ranger has from the factory, so the front sits level with the rear, and it allows a mild increase in tire size.
The kit uses a Top Hat Replacement design that combines a top mount leveling kit with a spring preload spacer in one CNC-machined billet aluminum component. It requires no cutting or modifications and keeps the factory ride and handling. Because the top hat combines both parts, the preload and leveling height come from one component. Installation takes a few hours with a spring compressor.
Key features
- 3.0 inch front leveling from a single billet aluminum top hat component
- Combines a top mount leveling kit and a spring preload spacer
- Requires no cutting or modifications to the factory parts
- Front crash bars can be loosened and moved forward for extra clearance
- Shocks not included
Installing a top hat leveler
A top hat leveler combines the top mount and the preload spacer in one part, so the spring is set in a single step. Because the spring has to be compressed for the job, a spring compressor is the key tool. Compressing the spring safely means using the right tool and confirming the compressor is seated before loosening the factory nut.
Front leveling on a truck with factory rake can make the front end look more even and gives room for larger wheel and tire combinations. The factory shocks usually stay in place, but their length should be checked against the new height. If the shocks are worn, replacing them at the same time helps keep the ride consistent.
After installation, check the front-to-rear height and confirm that the crash bars, brake lines and wiring do not contact the tires at full steering lock. Recheck the hardware after the first few drives and have the alignment checked before the truck sees heavy use.
- Use a spring compressor rated for the job
- Check crash bar clearance at full lock
- Have the alignment checked afterward
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2930 |
| Front lift height | 3.0 inch |
| Lift method | Top hat replacement with spring preload spacer |
| Material | CNC-machined billet aluminum |
| Shocks included | No |
| Suspension type | Leveling kit |
| Tire and wheel combinations | 18×9 +18 offset with 265/60R18; 18×9 +30 offset with 265/65R18; 20×9 +18 offset with 275/55R20; 20×9 +30 offset with 275/55R20 |
Vehicle fitment
It is a direct fit for the 2019–2021 Ford Ranger in XL, XLT and Lariat trims.
The kit is not for use with Ranger Ford Performance Level 1, 2 or 3 packages, or with the Ranger Tremor Edition. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit requires a spring compressor to install, and the factory spring has to be compressed to change the top mount, so the job calls for the proper tools. ReadyLift says installation takes just a few hours and that the kit is not for use with Ranger Ford Performance Level packages or the Tremor edition. The front crash bars can be loosened and adjusted forward to increase clearance for the larger tires.











