Overview
It is a 3-inch front lift kit made of steel strut extensions. It fits the 2001–2007 Toyota Sequoia (Limited and SR5) and the 2000–2006 Toyota Tundra (Base, Limited and SR5), and it levels the front of the truck with the rear.
The strut extension uses Smart Strut Technology, which sits on top of the strut assembly instead of compressing the springs. The kit gives 3 inch of lift and room for tires up to 33 inch on the 1999–2006 Tundra 2WD and 4WD. It keeps a smooth factory ride without adding pressure to the stock suspension. Fit details differ by model year, so check the model year before ordering.
Key features
- 3 inch of front lift from steel strut extensions
- Smart Strut Technology mounts on top of the strut
- No spring compression
- Black steel finish
- Front lift only, with no rear lift
Strut extensions and ride height
A strut extension sits between the top of the factory strut and its mount, so the front height rises without changing the spring. Because the spring is not compressed to make the change, the strut works in its normal range. Front-only lifts shift the angles of several parts, which is worth keeping in mind.
Sway bar links, brake hoses and front axle angles can be affected by a higher front end. Check these parts for length and clearance after installation, and listen for rubbing during full steering lock. Shock length should be checked as well, since the shock works through a different range at the new height.
Tire choice matters as much as the kit. Wheel offset, tire width and overall diameter all decide whether the tire rubs at full steering lock or under load. Inspect the inner fender and front bumper area after the first few trips to confirm there is no contact.
- Check sway bar link length
- Inspect brake hose routing
- Verify steering clearance at full lock
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-5000 |
| Front lift height | 3 inch |
| Lift method | Strut extension (Smart Strut Technology) |
| Material | Steel |
| Finish | Black |
| Rear lift | None, front lift only |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
Vehicle fitment
It fits the 2001–2007 Toyota Sequoia and the 2000–2006 Toyota Tundra in the trims covered. The 33 inch tire clearance applies to the 1999–2006 Tundra 2WD and 4WD.
The Tundra model years from 2007 onward and the 2008 and later Sequoia are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The strut extension fits on top of the factory strut, so the springs are not compressed. Check the front-to-rear height after installation to confirm the level stance, and allow for the 33 inch tire clearance to be checked against the wheel offset.









