Overview
The ReadyLift 66-3070 is an adjustable torsion key front leveling kit for the 2004–2012 Chevrolet Colorado and GMC Canyon, and for the 2006–2010 Hummer H3 and 2009–2010 Hummer H3T. The adjustable keys provide 1.5 to 2.25 inch of front lift and level the front of the vehicle with the rear. That window is useful when a truck has some factory rake to correct, because the front height can be set anywhere within it.
The forged keys grip the flat of the torsion bar for a tighter fit and are built to hold up over time. The kit includes a shock relocation bracket. It does not change the factory ride or add pressure to the stock suspension components.
Key features
- Adjustable 1.5 to 2.25 inch front lift
- Forged torsion keys that grab the flat of the torsion bar
- CNC-machined adjuster bolt pockets and 10.9 grade metric hardware
- Shock relocation bracket included
- Covered by a lifetime warranty for as long as the owner keeps the vehicle.
Tire size and clearance
Tire fitment depends on more than lift height. Wheel offset, backspacing, tire width and sidewall height all affect whether the tire clears the fender, inner liner and steering components at full lock. Choosing a tire size and wheel set before installation helps avoid rubbing after the front is raised.
After adjusting the keys, turn the wheels fully from side to side and watch for contact with the inner fender or brake lines. Check the shock relocation bracket for clearance against the tire at full compression. Retighten all fasteners after the first trips, and look for rub marks along the tire edge that show the setting needs adjusting.
- Check wheel offset before buying tires
- Test full steering lock for rub
- Watch for rub at full compression
- Recheck fasteners after early drives
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-3070 |
| Front lift height | 1.5 to 2.25 inch, adjustable |
| Lift method | Torsion keys |
| Shock relocation bracket | Included |
| Material | Steel |
| Finish | Black |
| Rear lift | None, front lift only |
| Bump stops | None |
Vehicle fitment
It fits the 2004–2012 Chevrolet Colorado and the 2004–2012 GMC Canyon in their trims, the 2006–2010 Hummer H3 and the 2009–2010 Hummer H3T.
The Colorado and Canyon are the models that ReadyLift names for the 32 inch tire clearance. The H3 and H3T are on the list separately. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torsion keys have to be installed with the torsion bar preload released, which requires a torsion key unloading tool. Adjust both keys evenly so the front sits level with the rear. The package includes the parts and hardware needed for installation, and ReadyLift provides installation instructions. Both keys should be adjusted in the same steps so the front stays even.
What’s included
The kit includes all necessary parts and hardware, along with installation instructions.









