Overview
It is a 2.5-inch front leveling kit built on forged torsion keys. It fits 2WD and 4WD 6-lug GM trucks and SUVs, including the 2002–2006 Cadillac Escalade, Chevrolet Tahoe, Suburban and Avalanche, GMC Yukon and Yukon XL, and the 1999–2006 Silverado and Sierra 1500. The keys level the front of the vehicle with the rear.
The torsion keys grab the flat of the torsion bar for a tighter fit. The kit uses 10.9 grade metric hardware and CNC-machined adjuster bolt pockets for accurate adjustment. A shock relocation bracket is included, so the factory shocks can be kept.
Key features
- 2.5 inch front lift through adjustable torsion keys
- Forged keys, which ReadyLift says are 25% stronger than OEM
- CNC-machined adjuster bolt pockets for accurate adjustment
- 10.9 grade metric hardware
- Shock relocation bracket included
Adjusting the torsion keys
Torsion keys change the preload on the torsion bars, which sets the front height. Adjusting them is a balance job, because each side must move the same amount to keep the front level with the rear. Small uneven changes can make the steering pull or the tires wear on one side.
Torsion bars are under load, so preload has to be released before a key can move. A torsion key unloading tool is the usual method for that. Once the keys are set, the adjuster bolts should be checked for tightness, since they carry the load through the key.
Measure the front-to-rear height after the first few drives, because the bars can settle slightly as they seat. Recheck the alignment at the same time, and verify the setting again after any suspension or tire work.
- Measure both sides before and after adjusting
- Check adjuster bolts for tightness
- Recheck height after the first drives
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-3000 |
| Front lift height | 2.5 inch |
| Lift method | Torsion keys |
| Shock relocation bracket | Included |
| Material | Steel |
| Finish | Black |
| Rear lift | None, front lift only |
| Track bar drop | Not included |
| Bump stops | None |
Vehicle fitment
It fits the 2002–2006 Cadillac Escalade, Escalade ESV and Escalade EXT, the 2002–2006 Chevrolet Avalanche 1500, Suburban 1500 and Tahoe, the 1988–1999 Chevrolet K1500, the 1999–2006 Chevrolet Silverado 1500, the 2007 Silverado 1500 Classic, the 2002–2006 GMC Yukon and Yukon XL 1500, the 1988–1999 GMC K1500, the 1999–2006 GMC Sierra 1500 and the 2007 Sierra 1500 Classic, across the trims covered.
Heavy-duty 2500 and 3500 trucks and the 2007 and later Tahoe and Yukon are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torsion key kits are adjusted by changing the preload on the torsion bars, so both keys have to be set evenly to keep the front level with the rear. The adjuster bolt pockets are CNC machined so the bolts seat correctly. A torsion key unloading tool is typically used to release the preload before the keys are moved.
What’s included
The forged torsion keys and the shock relocation bracket, along with the adjuster hardware.









