Select your vehicle
-13%

Rough Country .75″ Coil Spring Spacers – 7591

Rough Country

Shop Jeep Wrangler JL Leveling Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Two front coil spring spacers
  • Three-quarter-inch front lift
  • Easy bolt-on installation
  • Keeps the front level with the rear

Description

Overview

The Rough Country Coil Spring Spacers (part number R/C7591) are a three-quarter-inch front leveling set for the 2020–2026 Jeep Gladiator and the 2018–2019 and 2021–2026 Jeep Wrangler JL.

A pair of spacers sits on the front coil springs to raise the front end and level it with the rear. The factory ride quality is kept.

Key features

  • Two front coil spring spacers in the set
  • Front lift of three-quarter inch
  • Bolt-on installation
  • Maintains factory ride quality.
  • Levels the front with the rear of the vehicle
  • Covered by Rough Country’s Lifetime Replacement Guarantee

Leveling the front with the rear

A small front lift is most useful when a truck sits lower in front than in back, which is common on a stock Gladiator or Wrangler JL with a load in the rear. Three-quarter-inch spacers are meant for leveling rather than a full lift, so the look and the geometry change only a little.

Front coil spring spacers keep the factory springs and shocks in place, so the ride stays close to stock. After installation, the front alignment and headlight aim should be checked, as the nose of the truck sits higher. Tires with a larger diameter can also change how the front clears the fender when turning, so measure after the tire change.

  • Recheck headlight aim
  • Check front alignment after install
  • Inspect spacers at tire rotations

Specifications

Brand Rough Country
Part number R/C7591
Front lift Three-quarter inch
Front lift method Coil spring spacers
Finish Black
Fitment type Direct fit

Vehicle fitment

It fits the 2020–2026 Jeep Gladiator JT and the 2018–2019 and 2021–2026 Jeep Wrangler JL, in 2-door and 4-door models.

The 2007–2018 Wrangler JK is not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The spacers go on the front coil springs with no strut disassembly described, so the job is a bolt-on. Recheck the headlight aim after the front is raised.

What’s included

Two front coil spring spacers come in the set. Hardware is not included, so check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–2026Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JL)2018–2019, 2021–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude (4-Door), Unlimited High Altitude 4xe (4-Door), Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Rubicon 392 (4-Door), Unlimited Rubicon 4xe (4-Door), Unlimited Sahara (4-Door), Unlimited Sahara 4xe (4-Door), Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rough Country R/C7591 fit a 2021 Jeep Wrangler JL?

Yes. It fits the 2018–2019 and 2021–2026 Wrangler JL in both 2-door and 4-door models. Confirm your vehicle's year, model and trim before ordering.

How much lift does this set give the front?

Three-quarter inch. That is enough to level a front end that sits lower than the rear, which is the job this set is made for on the Gladiator and Wrangler JL listed here. Ask Rough Country if a larger rise is needed.

Is the set sold as one spacer?

No. The kit includes two front coil spring spacers, one for each side of the vehicle, so both front springs get a spacer.

Are coil spring spacers hard to remove if I change my mind?

Usually not. Removal is essentially the reverse of installation. Remove the mounting hardware, lower the front and take the spacers out. Keep the original hardware in a safe place so the truck can return to stock height easily.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Leveling Kits on Amazon