Overview
The Rough Country 9593 is a torsion bar leveling kit for 2011–2019 Chevrolet Silverado and GMC Sierra HD trucks. It uses a set of forged torsion keys to raise the front 1.5 to 2 inch and level it with the rear.
The kit is built for 2011–2016 GM HD trucks and allows tires up to 295/55R20. It is made for the 2500 HD and 3500 HD models in the trims covered, and it does not fit trucks with Magnetic Ride Control.
Key features
- Forged torsion bar adjuster keys, which Rough Country says are stronger than cast keys
- Easy bolt-on installation
- Levels the front with the rear of the vehicle
- Increased ground clearance
- Room for tires up to 295/55R20
Torsion keys on HD trucks
Heavy-duty trucks carry more weight, so the torsion bars and keys see higher loads than light-duty setups. Forged keys are designed to resist bending under those loads, and the keys should be inspected for any sign of cracking or deformation during routine service.
Magnetic Ride Control uses dampers and electronics that are sensitive to changes in suspension geometry. For trucks with that system, a torsion key kit is not the right choice, so confirm the system is absent before buying. Tow loads, bed loads and tire size all affect how the front end sits and wears.
Set both keys evenly and check the front height on each side after the first few drives. Recheck alignment after any front suspension work, and watch the front tires for uneven wear, which can show the lift is off.
- Confirm the truck has no Magnetic Ride Control
- Measure both sides after adjustment
- Check the front tire wear pattern
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C9593 |
| Front lift height | 1.5 to 2 inch |
| Lift method | Torsion keys |
| Finish | Black |
| Position | Front |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2011–2019 Chevrolet Silverado 2500 HD and 3500 HD, and the 2011–2019 GMC Sierra 2500 HD and 3500 HD, in the trims covered. It does not fit models with Magnetic Ride Control. Light-duty 1500 trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
The kit does not fit models with Magnetic Ride Control. Light-duty 1500 trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The keys are installed with the torsion bar preload released, using a torsion key unloading tool. Set both keys evenly so the front is level with the rear, and confirm the front lift on both sides after adjustment.










