Select your vehicle

Brackets, Gussets & Tabs

Brackets, gussets and tabs for builders working on axles and suspensions. This fabrication branch includes axle trusses, axle brackets and bracket kits, ball gussets, shock mount brackets, leaf spring perches, control arm mounts and raw laser-cut tabs. Brands include Artec Industries, Trail Gear, Blue Torch Fabworks and G2 Axle and Gear. Review specifications on each product page, then compare the products below.

G2 Dana 44 front axle truss with gusset and bracket

Big tires and long-travel suspension put loads on an axle housing that the factory brackets were never built for. This is the raw steel for a stronger build: trusses, link and track bar mounts, spring perches, coil buckets and blank tabs that you weld or bolt on to reinforce an axle or set up custom geometry.

Axle trusses are more than half of this section, mostly for Dana 30, 44 and 60 housings, sold as full kits or top plates alone. Control arm mounts and axle brackets cover link, track bar and shock mounting points, often sold by side and position. Complete bracket kits and swap kits help when you put a different axle under a Jeep. Check plate thickness, axle tube diameter and whether the part needs welding.

79Parts listed
8Part types
42Axle truss listings
15Control arm mount listings
3/16"Common bracket plate
3–3.5"Axle tube sizes listed

Shop brackets, gussets and tabs

Popular fabrication brackets

Fabrication bracket reference

Material, tube size and kit contents taken from listings in this category. Many brackets are sold one side or one position at a time, so build a full parts list before ordering.

Material and tube size on listings

Rubicon Express RE9968 bracket kitLaser cut 3/16" cold rolled steel
Currie CE-7111 lower arm bracketsLaser cut 3/16" steel, radiused, pair
TeraFlex 3992790 FlexArm mount3/16" steel, for 3" axle tubes
Artec JK3001 Dana 30 truss1/4" and .130" mild steel
Artec One Ton Front 60 swap kit3/8" truss top, 1/4" gussets, brackets
Artec BR1137 lower arm bracketsFor 3-1/2" tubes, with skids
Artec BR1024 Panhard mountFor 3" tubes, adjustable

Axle swap and upgrade kits listed

Artec One Ton Front 60 swap kit1997–2006 TJ with a Dana 60 front
Artec JK6042JK with a 1999–04 Super Duty Dana 60 front
Artec TJ8805OEM lower arm brackets for a Ford 8.8 swap
TeraFlex 3990700Front bracket kit for JK CRD60 axles
Rock Krawler RK07702Rear truss, Dynatrac XD 60 in JK/JL/JT

What G2 truss part numbers include

68-2050 / 68-2051 (front D30 / D44)Truss, gusset and bracket
68-2050-1 / 68-2051-1Top truss only
68-2052 (rear Dana 44 truss system)Upper link mount sold separately
68-2052-2Upper link mount
68-2052-3Rear coil buckets
All of the aboveUnpainted steel, welding required

Sold by position (Rubicon Express)

RE9991Front lower arm bracket, passenger side
RE9993Front lower arm bracket, driver side
RE9986Front upper arm bracket, passenger side
RE9976Rear upper arm bracket, passenger side
RE9953 front axle bracket kitPerches, arm, shock, track bar, sway mounts

These are structural, weld-on parts. Confirm the axle, tube diameter and side for each bracket, and have a qualified welder do the final welds if you are not experienced.

All Brackets, Gussets & Tabs 80 parts

Showing 1–12 of 80 resultsSorted by popularity

Parts for fabricators

These parts are building blocks for suspension and axle work. They are meant for welding or bolting into a project by people who understand the loads involved, such as when building a link suspension, swapping an axle or strengthening a weak point. Many are weld-on, so treat them as structural components.

What the subcategories cover

  • Axle trusses: a steel brace that welds along the axle tube to resist bending, popular on Dana 30 and Dana 44 axles under larger tires.
  • Axle brackets: link, track bar and Panhard mounts that weld to the axle housing.
  • Ball gussets: reinforce the area around the steering knuckle ball joint.
  • Shock and coilover mounts: locate shocks at the axle or frame.
  • Spring perches and control arm mounts: hold leaf springs or arms in position.
  • Tabs: laser-cut steel pieces for building custom mounts.

How to choose

First identify the axle or frame that the part must fit, such as Dana 30, Dana 44, Dana 60 or another axle, and whether it is a front or rear application. Tube diameter, bracket thickness and bolt hole size must match your project. Many mounts are listed as universal but still require careful measuring. Truss kits are often vehicle specific and may include axle swap hardware, so check what is included.

Look at the material and thickness, as thicker plate adds strength and weight. Check that the part is made from weldable steel and whether it arrives bare or coated. Coatings must be removed at weld areas.

Welding and installation

Axle and suspension welds carry safety-critical loads. Proper preparation, correct filler material, penetration and heat control matter, and a poor weld can fail without warning. If you do not have welding experience, hire a qualified fabricator. Measure geometry carefully, including pinion angle, link angles, track bar level and axle centering, before final welding. Avoid overheating axle tubes, since that can warp the housing.

Fitment and checks

After installation, inspect welds and bolts regularly, especially after hard trail use. Confirm fitment for your exact vehicle and axle, and follow the manufacturer's specifications and instructions. Alignment and driveline checks are recommended after changes.

Planning before you cut or weld

Good fabrication starts with measurement and a plan. Sketch the suspension geometry, including link lengths, angles and instant center, before locating any bracket. Use jack stands, a level surface and tools such as a straightedge, a tape measure and an angle finder to verify axle position. Tack weld parts first and recheck everything before final welds, because it is much easier to move a tack than a finished weld. Clean paint and coatings from the weld area, wear proper eye and respiratory protection, and keep a fire extinguisher nearby. Consider stress risers too: avoid abrupt ends on gussets, round the corners and keep welds away from high-flex areas. When the work is complete, inspect the welds, paint the bare metal to prevent rust and recheck bolts after the first trail run.

Common mistakes include welding without measuring first, using the wrong filler for the base steel, and trusting a bracket's appearance rather than its thickness. Check that the plate thickness suits the load, and avoid placing welds on the tension side of thin tubing without reinforcement.

Popular Brackets, Gussets & Tabs brands

Brackets, Gussets & Tabs FAQ

What does an axle truss do?

A truss is a steel brace welded along the axle tube to resist bending and keep the housing straight. It is common on larger-tire builds. Fit depends on the axle model, so confirm the compatible axle on the product page.

Do I need to weld these brackets?

Many brackets and gussets are weld-on, while some mounts and kits bolt in. Check the product description. For safety-critical axle and suspension welds, use an experienced welder or professional fabricator.

What is a ball gusset?

A ball gusset is a reinforcing piece around the steering knuckle ball joint area on some axles. It helps strengthen the area, particularly with large tires or hard use. It must match your axle type.

What are laser-cut tabs used for?

Tabs are precision-cut steel pieces that fabricators use to make custom mounts, such as for links, shocks or brackets. Check the material thickness and the hole sizes and make sure they suit the load.