Overview
The RE1920S is a spring perch, the seat that holds the lower end of a suspension spring on an axle. It is a universal fit part with part number RE1920S.
Compare the part number RE1920S against the perch you are replacing before ordering. Check the spring it will carry and the axle it mounts to, since a perch has to match both.
Checking a spring perch
A spring perch takes the load of the spring and passes it into the axle, so it sees constant stress over rough ground. Look at the weld or mounting surface for cracks, and check that the perch sits square against the spring end. A tilted perch can move the spring off its intended path.
When replacing a perch, measure the old one’s footprint and the spring seat diameter. Compare them with the new part before removing the spring. Keep the spring and perch clean, since grit between them can cause uneven wear. Note the spring rate and free height on your build sheet.
Spring height and axle position change after a lift, so recheck the perch alignment afterward.
- Inspect welds for cracks
- Check that the perch sits square to the spring
- Recheck alignment after any lift
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1920S |
| Type | Spring perch |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit part, so the match depends on the spring and axle in your build rather than a model or year.
Confirm the spring size and axle type on your build before ordering.





