Overview
The Blue Torch Fabworks Trick Tab with a 1/4-inch hole, part number BTFBTF03029, is a flat mounting tab for attaching objects to round tube. It is a general-purpose tab, not a part for one vehicle.
The tab is stamped from 1/8-inch steel plate, with the bolt hole centered 1 inch from the mounting base. It is about 2 inches wide and is designed to carry body panels, radiator catch cans and similar parts.
Key features
- Stamped from 1/8-inch steel plate
- 1/4-inch bolt hole, centered 1 inch from the mounting base
- About 2 inches wide
- Designed for round tube of any diameter
Planning a tube mount
A flat tab welded or clamped to round tube needs a stable base, and the tube’s diameter changes how the tab sits against it. On thin wall tube, the mounting area can flex under load, so it helps to plan the tab location where the tube is supported and the wall is solid. Mark the hole position carefully before drilling, since a small error moves the part and can affect alignment.
Once the tab is in place, the bolt hole needs the right hardware for the load. Washers spread the clamp force on the tab, and a lock method keeps the fastener from backing out under vibration. Inspect the joint after the first few drives and check for cracking around the hole or the tube.
- Mark and center-punch the hole before drilling
- Use washers to spread clamp load on the steel tab
- Inspect the joint for cracks after the first drives
Specifications
| Brand | Blue Torch Fabworks |
|---|---|
| Part number | BTFBTF03029 |
| Type | Misc. mounting tab |
| Material | Steel plate, 1/8 inch |
| Hole size | 1/4 inch |
| Hole position | 1 inch from mounting base to hole center |
| Width | About 2 inches |
| Tube diameter | Any |
| Sold as | Single |
Vehicle fitment
This is a general mounting tab with no vehicle list, so there is no vehicle fitment to confirm.
Check that the 2-inch width and 1-inch offset clear your body panel or catch can before you drill the mounting hole.
What’s included
One Trick Tab with a 1/4-inch hole, sold as a single tab.
Not included: Fasteners and the body panel, catch can or other part you mount to the tab.







