Overview
The G2 Dana 44 Front Axle Truss, part number 68-2051, is a welded-on truss and armor system for the front Dana 44 axle of the 2007-2018 Jeep Wrangler JK. G2 Axle and Gear builds it as a heavy-duty JK Rubicon front axle truss, so it is aimed at owners running a Dana 44 front axle who want more strength in the axle housing.
The truss ties the whole axle together rather than only the long tube, adding strength across the axle in a lightweight package. The kit is built around 1/4 inch main components and 1/8 inch reinforcement plates, with the main pieces laser cut for a precise fit.
This axle truss is for the Dana 44 front, and the fitment covers the JK as a model. It ships unpainted.
Key features
- Heavy-duty steel construction with 1/4 inch main components
- 1/8 inch reinforcement plates
- Laser cut components for a precise fit
- Full-axle truss rather than a single long-tube brace
- Lower control arm skids and inner C gussets included
- Reinforced stock height track bar bracket
Before welding
A truss changes how the whole front axle carries load, so the job should start with a clean and inspected housing. Remove paint and rust from the areas that will be welded, and look closely at the cast center section for cracks. Welding on a cast part is demanding, so the work is best left to someone with the right equipment and experience.
Plan the install so the axle ends up square and at the correct height. Fit the truss and brackets dry before any welds are made, and check the track bar and control arm geometry after the parts are tacked. Once the truss is on, inspect the welds after the first drives and look for movement or cracking, since early signs are easier to fix.
- Clean and inspect the center section before welding
- Dry-fit the truss and brackets before welding
- Check track bar and control arm geometry after tacking
- Inspect welds after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 68-2051 |
| UPC | 70000699344 |
| Axle location | Front |
| Axle type | Dana 44 |
| Steering ram mount | Without steering ram mount |
| Main components | Heavy-duty steel, 1/4 inch thick |
| Reinforcement plates | 1/8 inch thick |
| Finish | Unpainted |
| Welding | Required |
| Fitment type | Direct fit |
| Body style | 2-door and 4-door |
Vehicle fitment
G2 Axle and Gear’s Dana 44 front axle truss is for the Jeep Wrangler JK, the 2007 to 2018 model years, in both two-door and four-door form. Since the fitment is for the JK model, the axle truss covers the full model range within those years. The JL (2018-2022) and the Gladiator are not part of this fitment.
Confirm your vehicle’s year, model and trim before ordering, and confirm the front axle is a Dana 44 before fitting this truss.
Installation notes
Welding is required, including to the cast center section of the axle. Professional welding skills are strongly recommended, and the truss is not a bolt-on part.
What’s included
The kit includes the main axle truss assembly, lower control arm skids, inner C gussets and a reinforced stock height track bar bracket.
Not included: Paint, since the kit ships unpainted.


















