Overview
The Trail Gear General Purpose Tab, part number TGI303548, is a steel mounting tab for link brackets and other general-use attachments. It is 1/4 inch thick with a 1/2 inch bolt hole that can be drilled out if a larger fastener is needed. It is universal fit and not built for one particular vehicle.
Key features
- 1/4 inch thick steel construction
- 1/2 inch bolt hole, which can be drilled out if necessary
- Intended for link brackets or other general-use mounting
- Trail Gear part number TGI303548
Using mounting tabs safely
A general purpose tab carries whatever load the bracket puts on it, so its mounting point matters as much as the steel. Choose a location where the mounting surface is solid, free of cracks and able to take the force of the attached part without flexing.
When a bolt hole is enlarged by drilling, the edge of the hole loses some of its surface and can crack under load if it is not handled carefully. Drill slowly, use cutting fluid and deburr the hole before fitting a larger fastener.
Fastener quality affects how the joint holds. Use hardened bolts with suitable washers and check tightness after the first few uses. Inspect the tab for cracks or bending any time the mounted part sees heavy loads.
- Drill slowly with cutting fluid
- Deburr the hole after enlarging
- Use hardened fasteners and washers
- Inspect the tab after heavy loads
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI303548 |
| Material | Steel |
| Thickness | 1/4 inch |
| Bolt hole | 1/2 inch |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit tab with no vehicle year, make, model or trim tied to it. Because it is a general mounting tab, confirm the tab location and the bracket it attaches to match your vehicle’s layout before drilling or mounting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Count the tabs and confirm you have bolts on hand before installation.










