Select your vehicle
-13%

Rock Krawler JK/JL/JT Dynatrac XD 60 Rear Axle Truss – RK07702

Rock Krawler

Shop Jeep Wrangler JL Axle Truss on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Krawler RK07702 rear axle truss for the Dana 60 axle type, built for the Dynatrac XD 60
  • Rear axle location; no steering ram mount
  • Fits 2007 to 2018 Jeep Wrangler JK, 2018 to 2026 JL and 2020 to 2026 Gladiator JT
  • Made in the U.S.A.

Description

Overview

The Rock Krawler RK07702 is a rear axle truss for a Dana 60 rear axle. It is offered for the Dynatrac XD 60 rear axle and is made for Jeep JK, JL and JT vehicles.

Rock Krawler Suspension is a Made in the U.S.A. Jeep suspension manufacturer. The company also up-fits Jeeps in the North East and has built show quality Jeeps and purpose built competition rigs.

Key features

  • Rear axle truss for a Dana 60 axle type
  • Axle location: rear
  • No steering ram mount in this part
  • Vehicle coverage across Wrangler JK, Wrangler JL and Gladiator JT generations
  • Made in the U.S.A.

Before you buy

A rear axle truss braces the axle housing so it holds its position under load, which matters when the rear end is driven over rough terrain and loaded with bumpers, winches or a full payload. Under articulation the housing twists and bends, and a truss helps spread that stress into the frame rather than the tube and weld points alone. Because it changes how loads travel through the rear end, a truss is best judged as part of the whole rear setup.

Before buying, measure the mounting points on your current axle and frame and confirm the truss sits where your housing and crossmember allow. Trusses are often installed together with a track bar, control arms and a pinion angle check, since those parts share the same load paths. After installation, inspect the truss welds and bolts after the first few trail runs, looking for cracks, loose fasteners or fresh paint marks that suggest movement.

Specifications

Brand Rock Krawler
Part number RK07702
Axle type Dana 60
Axle named in title Dynatrac XD 60
Axle location Rear
Steering ram mount Without steering ram mount

Vehicle fitment

It fits the 2007 to 2018 Jeep Wrangler JK, including 2-door and Unlimited (4-door) models, the 2018 to 2026 Jeep Wrangler JL including Sport, Sahara, Rubicon, Moab and Willys trims, and the 2020 to 2026 Jeep Gladiator JT in several trims.

Wrangler TJ, LJ and earlier generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)
Jeep Wrangler (JL)2018–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude (4-Door), Unlimited High Altitude 4xe, Unlimited High Altitude 4xe (4-Door), Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Rubicon 392 (4-Door), Unlimited Rubicon 4xe, Unlimited Rubicon 4xe (4-Door), Unlimited Sahara (4-Door), Unlimited Sahara 4xe, Unlimited Sahara 4xe (4-Door), Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is the Rock Krawler RK07702?

It is a rear axle truss, part number RK07702, for a Dana 60 rear axle with no steering ram mount. It is offered for the Dynatrac XD 60 rear axle.

Which Jeeps does it fit?

It fits 2007 to 2018 Jeep Wrangler JK, 2018 to 2026 Wrangler JL and 2020 to 2026 Gladiator JT models. Check the year, model and trim against your vehicle before buying.

Does it fit a TJ or LJ Wrangler?

No, TJ and LJ Wranglers are not covered. Fit to any vehicle outside the JK, JL and JT models is not confirmed, so check your year, model and trim before ordering.

How can I tell if the rear axle truss needs attention?

Look for cracks or split welds at the mounting points, loose or stretched bolts, and a housing that has shifted or bent. Any of these means the truss and axle should be inspected before the rear end is driven hard again.

Should a truss be installed alongside other rear upgrades?

Often yes. A new truss changes how the axle is held, so a track bar, control arms and pinion angle should be checked at the same time. Confirm the mounting points line up before you start the install.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Axle Truss on Amazon