Overview
The G2 Axle and Gear 68-2052-2 is a rear Dana 44 upper link mount for Jeep Wrangler JK vehicles. It is made to be used with the G2 rear axle truss and armor system (68-2052-1), and it is designed to give the JK rear axle additional strength.
The mounts use 1/4 inch thick main components and 1/8 inch reinforcement plates, with laser cut parts for a close fit. Welding is required, and the mounts are unpainted heavy-duty steel.
Key features
- Designed for the rear Dana 44 axle on the Jeep Wrangler JK
- Made to work with the G2 rear axle truss (68-2052-1)
- Heavy-duty steel: 1/4 inch main components, 1/8 inch reinforcement plates
- Laser cut components for a close fit
- Unpainted; welding required
Why link mounts matter
Upper links control axle pinion angle and keep the axle from rotating under acceleration and braking. The mounts are where those forces enter the frame, so the attachment points see a lot of stress. Any cracked weld or bent bracket can allow the axle to shift, which affects steering and driveline wear.
When rebuilding the rear end, look at the link bushings, the frame brackets and the axle pads together. Replacing one worn piece while leaving others can leave uneven loads. Measure link length and axle position before and after the change, and recheck after the first few trips.
- Inspect frame mounting points for cracks
- Replace worn bushings at the same time
- Check that the axle moves freely through its range
- Recheck welds after the first off-road trips
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 68-2052-2 |
| Axle type | Dana 44 |
| Axle location | Rear |
| Steering ram mount | Without steering ram mount |
| Material | Heavy-duty steel |
| Main component thickness | 1/4 inch |
| Reinforcement plate thickness | 1/8 inch |
| Finish | Unpainted |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2007-2018 Jeep Wrangler (JK) in 2-door and Unlimited 4-door models, including Rubicon, Sahara, Sport, Sport S, X and 70th and 75th Anniversary editions.
The list does not include the JL Wrangler, the Gladiator, or any TJ, LJ or YJ model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required to attach these mounts, and professional welding is recommended. Confirm the truss fit before welding, since the components are laser cut to precise specifications.
What’s included
Check the package contents for included hardware before starting the install.
Not included: The G2 rear axle truss and armor system (68-2052-1), which these mounts are designed to work with.








