Select your vehicle
-13%

TeraFlex Long Arm Bracket Kit – 1968000

TeraFlex

Shop Jeep Gladiator Control Arm Mounts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • TeraFlex long arm bracket kit, part TER1968000
  • Fits 2020-2026 Jeep Gladiator (JT) with 36-inch lifts
  • Upper and lower mounts in each bracket
  • Long control arms are not included and must be added separately
  • Can be added to an existing suspension lift

Description

Overview

The TeraFlex TER1968000 is a long arm bracket kit for the 2020-2026 Jeep Gladiator (JT) with 36-inch lifts. The brackets provide adjustable long arm mounting at the frame ends and are a direct fit.

Each bracket has both upper and lower mounts, which simplifies installation while keeping a factory appearance. The kit can be added to an existing suspension lift and works with a front long arm suspension crossmember.

Key features

  • Upper and lower mounts in each bracket
  • Frame-end mounting points streamlined into the design
  • CAD-engineered for maximum strength, per the maker
  • Can be added to an existing suspension lift
  • Front long arm suspension crossmember adds strength to the setup
  • Designed to keep a factory appearance

Setting up the front end

Long arm brackets change the geometry the front end was built around, so the brackets are only part of the job. Once the arms are mounted, plan a full alignment check and a look at driveline angles before the vehicle goes back into regular use. Caster and pinion angle changes can show up as vibration or uneven tire wear if they are skipped. Work through each bracket before final tightening so the alignment settles evenly.

Trail use puts the most stress on the mounting points and the joints. After the first few outings, re-check fasteners and look for cracked welds, bent tabs or loose hardware at the frame ends. Replace any worn bushings before they allow play, because play at the mount can change the arm angle under load and affect steering feel.

Specifications

Brand TeraFlex
Part number TER1968000
Lift height Designed for 36-inch lifts
Long control arms Not included; compatible arms are Alpine #1317005 and Alpine IR #1318005
Fitment Direct fit

Vehicle fitment

Fits the 2020-2026 Jeep Gladiator (JT) in trims including 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport.

This kit is for the JT Gladiator only, so it does not cover the JK or JL Wrangler. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Long arm geometry changes alignment, so have the front end aligned after the control arms are installed, and check driveline angles.

What’s included

The kit includes the long arm brackets. Check the package contents against your installation before starting, including whether the front long arm suspension crossmember is in your box.

Not included: Long Control Arms, such as Alpine #1317005 or Alpine IR #1318005.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the TeraFlex 1968000 fit a 2020 Jeep Gladiator?

Yes, it fits the 2020-2026 Jeep Gladiator (JT), across several trims including Sport, Rubicon and Overland. Confirm that your trim appears in the fitment range before you install the brackets.

Are the long control arms included?

No. Long control arms are not included. The brackets must be used with adjustable long control arms, such as Alpine #1317005 or Alpine IR #1318005, to complete the front long arm setup.

Can these brackets go on an existing lift?

Yes, the brackets can be added to an existing suspension lift. They are designed for JT Gladiator models with 36-inch lifts, so confirm that your lift height matches before installing.

How do long arm brackets affect tire wear?

They can, because long arms change caster and camber settings. Have the alignment checked after installation and after any suspension change, so the front tires wear evenly and the steering stays predictable.

How often should long arm mounts be inspected?

Inspect them after rough trail use and after any impact to the frame ends. Look for cracked welds, loose fasteners and bent tabs, and recheck the hardware after the first few outings.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Gladiator Control Arm Mounts on Amazon