Overview
The DrawTite 75461 is a Class III/IV Max-Frame rear trailer hitch with a 2 inch by 2 inch receiver, made for the 2007 to 2012 Toyota FJ Cruiser. It fits the Base, TRD Special Edition and Trail Teams Special Edition trims.
The hitch is all welded and built for the specific vehicle with no adapters. It does not fit with a roll pan.
Key features
- Max-Frame design
- 2 inch by 2 inch receiver
- Class III/IV rating
- All welded construction
- No adapters used for the vehicle fit
- Does not fit with a roll pan
Rear towing on an FJ Cruiser
The FJ Cruiser has a short rear overhang and an upright body, so a rear hitch carries a trailer’s weight close to the rear axle. Keep tongue weight moderate and check trailer loads so the rear end does not feel light at the steering. Spare tire carriers and bike racks need the same care, so confirm their weight before hitching.
Off-road owners should note that a rear hitch can reduce rear clearance on steep exits. Remove the ball mount when the trail gets technical, and inspect the hitch bolts and welds after rocky routes or any impact.
- Remove the ball mount on technical trails
- Inspect hitch bolts after rough trail use
- Check trailer brake needs before connecting
- Keep the receiver clean and covered
Specifications
| Brand | DrawTite |
|---|---|
| Part number | DRA75461 |
| Front or rear | Rear |
| Receiver size | 2 inch x 2 inch |
| Weight class | Class III/IV |
| Roll pan fit | Does not fit with roll pan |
| Construction | All welded |
Vehicle fitment
It fits the 2007 to 2012 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims.
Other FJ Cruiser years and other Toyota models are not in the list, and trims outside those three are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.











