Overview
The DrawTite Class III/IV multi-fit motorhome trailer hitch, part number DRA5350, is a rear mounted receiver hitch with a 2 inch by 2 inch receiver. It is a universal fit hitch, so confirm fit for your vehicle’s year, model and trim before ordering.
The welded construction is built for strength, and the hitch is designed to fit without adapters. DrawTite hitches carry a nationwide lifetime warranty.
Key features
- Rear mounted receiver hitch
- 2 inch by 2 inch receiver size
- Weight class III/IV
- All welded construction.
- Does not fit with a roll pan
Towing with a rear receiver hitch
A rear receiver hitch carries trailer load through a square tube that slides into the receiver. Its weight class sets how much tongue weight and trailer weight it should handle, so check the class against the trailer you plan to tow before hooking up. The class is a limit, not a target.
Receiver hitches are best inspected alongside the rest of the rear end. Look for cracks at welds, bent tube sections and rust spreading under the coating. Because this hitch does not fit with a roll pan, confirm the rear bumper or step clears the receiver before you bolt it on.
Keep the pin and clip in place when towing, and replace them if the pin shows wear or the clip is bent. Check the hitch bolts after the first few trips, since receiver hitches can settle as the vehicle is loaded and unloaded.
- Check welds and receiver tube for cracks
- Keep the pin and clip in good condition
- Recheck hitch bolts after early trips
Specifications
| Brand | DrawTite |
|---|---|
| Part number | DRA5350 |
| Front or rear | Rear |
| Receiver size | 2 inches x 2 inches |
| Weight class | Class III/IV |
| Roll pan compatibility | Does not fit with roll pan |
| Construction | All welded |
| Fitment listing | Universal Fit |
Vehicle fitment
Fitment is universal, and the hitch is designed to mount without adapters. Check the mounting points against your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check your installation requirements for hardware before starting.









