Select your vehicle
-13%

DrawTite Class V Forged Ball Mount (Black) – 40330

DrawTite

Shop DrawTite Drop Hitches Ball Mounts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • DrawTite Class V forged ball mount, part number DRA40330
  • 2 inch drop with a 2 inch by 2 inch shank
  • 1.250 inch ball hole, black steel finish
  • Universal fit; confirm receiver size and weight rating before ordering

Description

Overview

The DrawTite Class V forged ball mount, part number DRA40330, is a black steel ball mount with a 2 inch drop for trailer towing. It has a 2 inch by 2 inch shank and a 1.250 inch ball hole, and it is a universal fit.

Confirm the weight rating against your hitch and trailer before towing.

Key features

  • Forged Class V construction
  • 2 inch drop height
  • Black steel finish
  • 1.250 inch ball hole

Before you tow

A ball mount carries the trailer tongue weight through the receiver, so the shank, welds and pin hole all share the load. Before each trip, look for cracks at the welds, bends in the shank and any movement once the pin is set. Surface rust that flakes or paint that has chipped around the shank can be an early sign that the mount is wearing.

Drop height changes how level the trailer rides. A drop that is too deep or too shallow can leave the trailer nose high or low, which affects steering feel and brake response. Measure the coupler height with the vehicle parked on level ground before deciding whether this drop suits the setup.

  • Re-check the ball nut torque before the first trip and again after a few miles
  • Grease the ball and coupler socket to reduce wear
  • Keep the receiver tube free of rust so the mount slides in cleanly
  • Replace a mount that shows cracks near the welds

Specifications

Brand DrawTite
Part number DRA40330
Drop 2 inch drop
Shank size 2 inches x 2 inches
Ball hole size 1.250 inches
Finish Black
Material Steel

Vehicle fitment

It is a universal fit ball mount, so it is not built for a specific year, make or model. Match the 2 inch by 2 inch shank to your receiver and the 2 inch drop to your trailer height.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check that your hitch ball’s shank fits the 1.250 inch ball hole before towing.

What’s included

Confirm the package contents match your installation plan before starting.

Not included: hitch ball.

Questions & Answers

Is part number DRA40330 a drop hitch ball mount?

Yes. It is a DrawTite Class V forged ball mount with a 2 inch drop, a 2 inch by 2 inch shank and a 1.250 inch ball hole.

Does this mount fit a specific vehicle?

It is a universal fit mount rather than one made for a particular year, make or model. Match the 2 inch by 2 inch shank and 2 inch drop to your receiver and trailer before ordering.

What material and finish is the DRA40330?

The mount is made of steel with a black finish. Steel is the material it is built from, and the finish is black. If coating or material grade matters to your choice, confirm it against your own requirements before ordering.

How often should a ball mount be inspected?

Inspect it before every trip, paying attention to the welds, the shank and the hitch pin hole. Look for cracks, bends, flaking rust and any movement at the receiver fit. Replace the mount if damage is found rather than welding it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop DrawTite Drop Hitches Ball Mounts on Amazon