Overview
The DrawTite Front Mount Receiver, part number DRA65009, is a 2 inches by 2 inches front receiver hitch for the 1984–2001 Jeep Cherokee (XJ), the 1986–1992 Jeep Comanche and the 1984–1990 Jeep Wagoneer (SJ).
It is custom built for a precise fit, with welded construction, a black powder coat finish and a design that spreads the towing load over the frame. A limited lifetime warranty applies to the hitch.
Key features
- Custom built for a precise fit
- Welded construction for strength and safety
- Black powder coat finish
- Designed to distribute the towing load over the frame
- Designed to withstand road use within its rated capacities
- Limited lifetime warranty
Front receivers on older Jeeps
A front receiver sits ahead of the bumper and gives a second attachment point for winches, light bars or utility carriers. On a Cherokee XJ, Comanche or Wagoneer SJ, the front of the frame and the bumper mounts carry the added weight, so both need to be sound before any accessory goes on. Check for rust at the frame horns and bumper brackets before mounting.
Front clearance changes with a receiver fitted. Accessories often hang lower than the bumper, which can affect approach angle and the risk of contact on rough trails. Keep the front receiver load light and balanced, and avoid loading it beyond what the accessory’s own mounts allow. Recheck the bolts after the first few trail runs.
- Inspect frame horns and bumper brackets for rust
- Keep accessory weight light and balanced
- Check approach clearance with the accessory fitted
- Recheck bolts after the first trail runs
Specifications
| Brand | DrawTite |
|---|---|
| Part number | DRA65009 |
| Receiver size | 2 inches x 2 inches |
| Mounting position | Front |
| Weight class | Not rated |
| Roll pan compatibility | Does not fit with a roll pan |
| Finish | Black powder coat |
| Construction | Welded |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, the 1986–1992 Jeep Comanche in Base, Chief, Custom, Eliminator, Laredo, Pioneer, X and XLS trims, and the 1984–1990 Jeep Wagoneer (SJ) in Base and Limited trims.
Grand Cherokee, Liberty and Cherokee years after 2001 fall outside this fit, so verify your year, model and trim first.
Installation notes
It does not fit with a roll pan, so check the front of the vehicle for one before installing. Since no weight class is rated, do not assume a towing capacity from the receiver size alone.
What’s included
Check the package contents against your installation before starting, and plan to supply your own hitch ball and ball mount if your setup needs them.
Not included: hitch ball and ball mount, to check and buy separately if your setup needs them











