Towing
Showing 157–168 of 1114 resultsSorted by popularity
-
Drop Hitches & Ball Mounts
Curt Slim Adjustable Channel Mount with Dual Ball – 45903
- Light-duty adjustable channel mount with a dual ball head
- Dual 2 inch and 2-5/16 inch trailer balls
- Maximum drop 3-3/4 inch and maximum rise 3-1/2 inch
- Rated 8,000 lbs on the 2 inch ball and 10,000 lbs on the 2-5/16 inch ball
SKU: CRT45903 -
Trailer Hitch Ball
Curt Rockerball Cushion Hitch with 2″ Trailer Ball and 5″ Drop – 45144
- Curt Manufacturing 45144 RockerBall cushion hitch, part number CRT45144
- 2 inch trailer ball with a 5 inch drop and standard 2 inch shank
- Rated 7,500 LBS with an integrated cushion isolator
- Suited to class 3, class 4 and class 5 receiver hitches as universal fit
- Includes anti-rattle shim kit; black finish
SKU: CRT45144 -
Trailer Hitch Ball
Curt Rockerball Cushion Hitch with 2″ Trailer Ball and 3″ Drop – 45143
- Curt Manufacturing 45143 RockerBall cushion hitch, part number CRT45143
- 2 inch trailer ball, 3 inch drop, standard 2 inch shank
- Weight rating 7,500 LBS with a cushion isolator for reduced vibration
- Universal fit for most class 3, class 4 and class 5 receiver hitches
- Includes anti-rattle shim kit; black finish
SKU: CRT45143 -
Trailer Hitch Pin Lock
Curt Rebellion XD Tongue Attachment – 45940
- Curt CRT45940 replacement tongue for the Rebellion XD adjustable ball mount
- Black finish
- 1-1/4 inch hole for a trailer ball with a 1-1/4 inch diameter shank
- Mounts onto the vertical shank of the Rebellion XD mount
- Rebellion XD mount not included
SKU: CRT45940 -
Drop Hitches & Ball Mounts
Curt Rebellion XD Adjustable Ball Mount with 2-1/2″ Shank – 45955
- Cushion hitch with ShockDrop technology for a smoother ride
- 2-1/2 inch x 2-1/2 inch shank for class 5 receivers
- Adjustable shank with 8 inch maximum drop and 1 inch maximum rise
- Rated 10,000 lbs with a 2 inch ball and 20,000 lbs with a 2-5/16 inch ball
SKU: CRT45955 -
Trailer Hitch Coupler
Curt QuickPin 2″ Trailer No-Latch Coupler – 25470
- No-latch trailer coupler that drops onto the ball and locks with a pin
- Rated for 3,500 lbs gross trailer weight, tested to SAE J684
- Accepts a standard 2-inch trailer ball and a 2-inch wide tongue beam
- Part number CRT25470 from Curt Manufacturing
SKU: CRT25470 -
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56515
- Curt 56515 5-flat wiring T-connector with 2-wire system
- Plugs direct into factory harness with a 4 pin connector
- Includes dust cap and ground wire with self-tapping screw
- Install time 5 min.
- Fits dozens of GM, Ford, Jeep, Ram, Toyota, Nissan and Honda models from 2014 to 2019
SKU: CRT56515 -
-
-
-
-
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56225
- Fits Nissan Frontier 2005–2019, Xterra 2005–2015, Pathfinder 2005–2010 and Suzuki Equator 2009–2012
- 2-wire T-connector, part number CRT56225, for vehicles without a factory tow package
- Plugs into the factory harness
- Listed install time of 30 minutes
SKU: CRT56225
What belongs in a towing setup
A complete tow setup has several links: a hitch mounted to the vehicle, a ball mount or head, a coupler-compatible ball, wiring, and, for heavier trailers, a brake controller and some form of suspension support. Weak or mismatched parts in any link limit the whole system, so it helps to think of the setup as a chain rather than a shopping list of separate items.
This category spans bolt-on receiver hitches, drop and adjustable ball mounts, gooseneck and fifth wheel mounting hardware, hitch pins and locks, trailer wiring connectors, mud flaps, and air or leaf-spring helpers that firm up the rear of a loaded truck.
Know your ratings first
Start with the numbers on your vehicle's door-jamb label and in the owner's manual: gross vehicle weight rating, gross combined weight rating, and the maximum tow rating. Every component, including the hitch class, ball mount, ball, pin, and trailer coupler, has its own rating, and your usable capacity is the lowest of them all.
Tongue weight matters as much as total weight. A trailer that is too light on the tongue can sway, while one that is too heavy overloads the rear axle and lifts weight off the front wheels. Many tow guides suggest roughly 10 to 15 percent of trailer weight on conventional trailers, but follow the manufacturer's numbers.
Matching hitch type to the job
- Receiver hitches come in classes, commonly I through V, with larger classes using 2-inch or 2.5-inch receiver openings and higher ratings.
- Gooseneck and fifth wheel hitches mount in the truck bed and suit heavy livestock, equipment, and RV trailers.
- Weight-distributing hitches and sway control spread tongue weight across the axles of the tow vehicle and trailer.
- Drop and rise ball mounts level the trailer so the coupler sits at the right height.
Measure from the ground to the top of the receiver and to the coupler of a level trailer before choosing a drop or rise.
Supporting the load and installing safely
Air springs, helper leaf springs, and similar load-leveling kits reduce rear sag when the truck is loaded. They do not raise the vehicle's rated capacity, so never treat them as a way to exceed the ratings on the label.
Many hitches bolt to existing frame holes, but some require drilling, trimming plastic, or removing exhaust parts. Use a torque wrench, follow the specified bolt torque, and recheck after the first few trips. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications before installing. Professional installation is sensible for gooseneck, fifth wheel, and brake controller wiring.
Common mistakes to avoid
Towing problems usually come from mismatched parts rather than a single bad component. Typical errors include using a ball that is rated below the trailer, ignoring tongue weight, skipping safety chains, and forgetting to confirm that the wiring connector matches the trailer plug.
Before every trip, walk around the rig: check the coupler latch and pin, chain crossing, light function, tire pressure on both vehicles, and brake controller gain. Lock the hitch pin when parked to deter theft.
Popular Towing brands
- Curt Manufacturing (269)
- AirLift (123)
- B&W Hitch (117)
- Firestone Ride-Rite (99)
- DrawTite (67)
- BOLT Lock (58)
- Weigh Safe Hitches (38)
- Smittybilt (37)
- Fastway Trailer Products (31)
- Supersprings (31)
- Husky Liners (26)
- Trimax Locks (22)
Shop Towing by type
- Suspension Load Leveling Kit (190)
- Hitches (200)
- Trailer Hitch Ball Mount (90)
- Brake Controllers & Electrical (118)
- Drop Hitches & Ball Mounts (86)
- Load Leveling Kits & Components (78)
- Trailer Hitch Pin Lock (47)
- Mud Flaps (43)
- Towing Accessories (49)
- Gooseneck Trailer Hitch (34)
- Leaf Spring Helper (26)
- Cargo Management (79)
- Gooseneck Trailer Hitch Mount Kit (16)
- Trailer Hitch Pin (14)
- Fifth Wheel Trailer Hitch Mount Kit (12)
- Truck Bed Cargo Organizer (9)
- Padlock (11)
- Trailer Wire Adapter (10)
- Trailer Hitch Covers (15)
- Fifth Wheel Trailer Hitch Bracket (7)
- Truck Tool Box Lock (8)
- Tow Bar Mounting Hardware (7)
- Fifth Wheel Trailer Hitch Slider (7)
- Trailer Wire Connector (5)
- Tie Down Anchors (6)
- Flasher (7)
- Trailer Brake Control (6)
- Tow Bar (5)
- Safety Chain (2)
- Leaf Spring Helper /Load Leveler Mounting Kits (4)
Towing FAQ
What hitch class do I need?
Match the class to the heavier of your trailer's loaded weight and tongue weight, using the lowest rating in the whole system. Class III and IV 2-inch receivers handle many campers and utility trailers, while heavy trailers may need Class V or a gooseneck. Confirm against your owner's manual.
Do I need a brake controller?
Many states require trailer brakes above a certain trailer weight, and the threshold varies by state. If your trailer has electric brakes, you need an in-cab controller wired to the vehicle. Check local regulations and the trailer manufacturer's guidance.
Can air springs increase my towing capacity?
No. Air springs and helper springs reduce sag and improve stability under load, but your towing and payload limits are set by the manufacturer. Staying within the ratings on the vehicle's label is still required for safe towing.
How do I choose a ball mount drop?
Park the loaded trailer level, then measure from the ground to the top of the receiver opening and to the underside of the coupler. The difference, adjusted for ball height, tells you the drop or rise needed to keep the trailer level.











