Select your vehicle

Curt Manufacturing Class III Fusion Mount (Black) – 45154

Curt Manufacturing

$34.40In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 5:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Class III fusion drop mount, Curt Manufacturing part CRT45154
  • 4 Inch Drop for lower hitch height
  • 2 Inches X 2 Inches shank, steel with gloss black powder coat
  • Permanently attached ball, fixed ball hole
  • Universal fit, not built for one year, make or model

Description

Overview

The Curt Manufacturing CRT45154 is a Class III fusion drop mount with a 4 Inch Drop. It lowers the hitch ball four inches below the receiver so a trailer can sit level. The ball is permanently attached to the mount, which prevents it from being lost.

It is a universal fit, so the receiver on your vehicle decides whether it works. A 4 Inch Drop sits deeper than the 2 Inch versions, so check trailer height before towing.

Key features

  • 4 Inch Drop for deeper hitch height
  • Permanently attached ball
  • Gloss black powder coat over steel
  • 2 Inches X 2 Inches shank

Setting up a drop hitch

A drop mount lowers the hitch ball below the receiver, which suits trailers whose coupler sits higher than the hitch. The deeper the drop, the more the mount sticks out from the vehicle, so ground clearance and the rear bumper area should be checked before hooking up.

Drop mounts put more stress on the bend area when a heavy trailer is attached. Start with the trailer loaded as it will tow, then measure whether the trailer sits level. If the nose is too high or too low, adjust the setup rather than adding extra height.

Look over the drop bend and welds regularly for cracks or rust, especially after rough roads. Keep the ball clean, check it is tight on the mount before each trip, and replace the mount if the steel shows deep damage.

  • Check ground clearance at full drop
  • Measure trailer level after each hookup
  • Inspect the drop bend for cracks

Specifications

Brand Curt Manufacturing
Part number CRT45154
Amount of drop or rise 4 Inch Drop
Finish Black, gloss powder coated
Shank size 2 Inches X 2 Inches
Ball hole size Fixed
Material Steel
Hitch class Class III

Vehicle fitment

Universal fit means this drop mount is not tied to one vehicle. Its 2 Inches X 2 Inches shank has to fit the receiver on your tow vehicle.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

With a 4 Inch Drop, hitch up and check that the trailer sits level before towing, since the drop changes the hitch height.

What’s included

The drop mount with its permanently attached ball.

Not included: a receiver hitch.

Questions & Answers

Yes or no: is the CRT45154 universal fit?

Yes. It is a universal fit, so it is not tied to a specific year, make or model. Check that its 2 Inches X 2 Inches shank matches your receiver before installing.

How much drop does the CRT45154 provide?

The CRT45154 has a 4 Inch Drop, which lowers the hitch ball four inches. Drop is the distance the ball sits below the mount's shank. Its shank is 2 Inches X 2 Inches and its finish is black.

What material is the CRT45154 made from?

It is made from steel with a gloss black powder coat. The ball hole is fixed, and the ball is permanently attached to the mount, so it cannot separate.

How often should a drop mount be inspected?

Inspect a drop mount before each season of towing and after rough trips. Look for cracks, bends or rust at the drop bend and welds, and check that the ball and hardware are tight before hooking up.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon