Overview
The Curt Manufacturing Class III 2-inch receiver hitch, part number CRT13401, is a rear-mount round tubular hitch that fits 1973-1974 and 1987-1991 Chevrolet Blazer, 1975-1986 Chevrolet K5 Blazer and 1973-1991 GMC Jimmy models.
Curt describes its round tubular hitches as a no-drill installation for towing above 4,000 pounds gross trailer weight (GTW) and below 10,000 pounds GTW. The receiver opening measures 2 inches by 2 inches, and the finish is gloss black powder coating. Curt presents the Class III hitch as a value option for mid-capacity towing, and lists its weight class as Class III/IV. It does not fit with a roll pan.
Key features
- No-drill installation
- Round tubular design
- Towing range above 4,000 pounds GTW and below 10,000 pounds GTW
- 2 inch by 2 inch receiver opening
- Rear mounting position
- Gloss black powder coating
- Does not fit with a roll pan
Choosing the right setup
A receiver hitch is the attachment point for a trailer or carrier, so the rating and receiver size should match what you tow. Before buying, think about the heaviest load you expect and whether your vehicle’s wiring harness and trailer lights will connect easily to the hitch area. A round tubular design has a different look and mounting feel than a square body hitch, so check how the hitch sits behind the bumper before committing.
Receiver hitches are often bought with a matching ball mount, hitch pin and trailer wiring connector. Choosing a ball mount with the right drop or rise keeps the trailer level, and a properly sized hitch pin prevents the ball mount from working loose. Pairing the hitch with these parts at the same time avoids mismatched fittings later.
- Match the ball mount to the receiver opening before towing
- Check trailer wiring connections against the vehicle harness
- Keep the hitch pin clipped in place whenever the receiver is in use
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13401 |
| Mounting position | Rear |
| Receiver size | 2 inches by 2 inches |
| Weight class | Class III/IV |
| Towing range | More than 4,000 pounds GTW and less than 10,000 pounds GTW |
| Finish | Gloss black powder coating |
| Roll pan fit | Does not fit with a roll pan |
| Installation | No drilling |
Vehicle fitment
It fits 1973-1974 and 1987-1991 Chevrolet Blazer (Base, Custom Deluxe, Scottsdale, Silverado), 1975-1986 Chevrolet K5 Blazer (Base, Cheyenne, Custom, Custom Deluxe, Deluxe, Scottsdale, Silverado), and 1973-1991 GMC Jimmy (Base, High Sierra, Sierra Classic, Sierra Grande, Street Coupe).
Blazer years outside the ranges above and GMC models other than the Jimmy are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a no-drill installation, so mounting does not require drilling. Because the hitch does not fit with a roll pan, confirm that no roll pan is fitted before mounting it.
What’s included
Included hardware is not known for this hitch. Check the package contents against your installation before starting.









