Select your vehicle

Curt Manufacturing Class III 2″ Receiver Hitch – 13460

Curt Manufacturing

$258.60In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:00 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2020–2021 Toyota Highlander, listed by Curt Manufacturing as a direct-fit custom hitch
  • Class III/IV rear receiver hitch with a 2 inches x 2 inches receiver size
  • Rated for 6,000 lbs gross trailer weight and 900 lbs tongue weight
  • Weight distribution compatible, rated 8,000 lbs WD and 900 lbs WDTW
  • Black powder coat over an A-coat rust prevention dip, with a limited lifetime warranty

Description

Overview

The Curt Manufacturing CRT13460 is a Class III 2-inch receiver hitch for the 2020–2021 Toyota Highlander, mounted at the rear of the vehicle. It is a direct-fit custom hitch, engineered for this specific vehicle rather than a generic frame application.

Class III hitches handle towing jobs such as fishing boat trailers, pop-up campers, ATV trailers and utility trailers. The same receiver also supports a hitch-mounted cargo carrier or bike rack. The receiver tube accepts a 2-inch ball mount or other 2-inch hitch accessory with a 2-inch by 2-inch shank.

Key features

  • Class III/IV rating with a 2 inches x 2 inches receiver tube opening
  • Tested to SAE J684, with a 6,000 lbs gross trailer weight and 900 lbs tongue weight rating
  • Compatible with a weight distribution hitch, rated 8,000 lbs WD and 900 lbs WDTW
  • Welded using a combination of manual and robotic operations, made in the USA
  • Dipped in an A-coat for rust prevention, inside and out, then co-cured in a black powder coat
  • Covered by a limited lifetime warranty

Choosing a hitch ball mount

A receiver hitch only works as well as the parts that attach to it. The ball mount, cargo carrier or bike rack should match the 2-inch receiver opening and the load you plan to tow or carry. Check that the mount’s shank size and rating suit both the trailer and the receiver before connecting anything.

Rear receivers also carry tongue weight, so the trailer’s hitch load should stay within what the receiver and any weight distribution equipment can handle. Match the ball diameter and mount height to the trailer coupler so the trailer sits level when hitched.

  • Match the ball mount shank to the 2-inch receiver opening
  • Confirm the trailer’s tongue weight before hitching
  • Use a locking pin or clip to keep accessories secured
  • Keep the receiver free of dirt and rust before inserting accessories

Specifications

Brand Curt Manufacturing
Part number CRT13460
Receiver size 2 inches x 2 inches
Weight class Class III/IV
Front or rear Rear
Fits with roll pan N/A
Fitment type Direct fit
Gross trailer weight 6,000 lbs
Tongue weight 900 lbs
Weight distribution rating 8,000 lbs WD
Weight distribution tongue weight 900 lbs WDTW
Test standard SAE J684
Finish Black powder coat over A-coat rust prevention
Warranty Limited lifetime

Vehicle fitment

This hitch fits the 2020–2021 Toyota Highlander, including the Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum and XLE trims.

Other Toyota SUVs and model years outside 2020–2021 are not covered by this fit. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Curt advises that you never exceed the lowest-rated towing component in your combination. Check the hitch rating against your trailer, weight distribution equipment and vehicle before towing.

What’s included

The hitch is described with hardware that may include imported components.

Not included: a ball mount or other hitch accessory, which attaches to the 2-inch receiver.

SKU: CRT13460 Categories: , ,

Fitment

VehicleYearsTrims
Toyota Highlander2020–2021Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the CRT13460 fit a 2019 Toyota Highlander?

No. The CRT13460 fits 2020–2021 Toyota Highlander models only, including the Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum and XLE trims. Model years outside that range are not covered.

What receiver size and weight ratings does this hitch have?

It has a 2 inches x 2 inches receiver size and is classed as Class III/IV. The hitch is rated for 6,000 lbs gross trailer weight and 900 lbs tongue weight, and it was tested to SAE J684.

Can I use a weight distribution hitch with the CRT13460?

Yes. The hitch is compatible with a weight distribution hitch and carries an 8,000 lbs WD rating and a 900 lbs WDTW rating. Check these figures against your trailer and vehicle before towing.

Does the hitch come with a ball mount?

The hitch does not include a ball mount. The receiver accepts a 2-inch ball mount or other 2-inch accessory with a 2-inch by 2-inch shank, so a ball mount is a separate purchase.

Can a hitch-mounted bike rack or cargo carrier be used with this receiver?

Yes, a hitch-mounted bike rack or cargo carrier can use the 2-inch receiver. Confirm the carrier's own weight rating and that it clears the rear bumper and tailgate before loading.

How often should the hitch be inspected?

Check the welds, mounting bolts and receiver for cracks, rust or movement before towing, and after the first few trips with a new trailer. Re-tighten fasteners as needed and replace any damaged part before use.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon