Overview
Curt’s Class III Ball Mount in black, part number CRT45060, gives a 4 Inch drop on a 2 Inches X 2 Inches shank with a 1 Inch ball hole. The mount is steel.
Curt offers this Class III mount in several heights. A 4 Inch drop places the trailer ball lower than the receiver, which is the main difference to check for your setup.
Key features
- 4 Inch drop height
- Steel construction in black
- 2 Inches X 2 Inches shank
- 1 Inch ball hole
- Class III ball mount
Matching drop to your trailer
Drop refers to how far the ball sits below the receiver. On a trailer that sits lower than the tow vehicle, the drop brings the coupler and ball into line so the trailer rides level. Measuring with the vehicle and trailer on level ground is the most reliable way to find the drop you need and avoid a ball that is too high or too low.
Once the mount is in place, make sure the ball and coupler are the same size and that the coupler latch closes fully. Check the ball nut after the first few trips, because vibration can loosen it. A light coat of grease on the ball helps prevent seizing where the coupler rides on it.
- Ball and coupler sizes match
- Coupler latch closes fully
- Ball nut rechecked after early trips
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45060 |
| Drop | 4 Inch Drop |
| Shank size | 2 Inches X 2 Inches |
| Ball hole size | 1 Inch |
| Finish | Black |
| Material | Steel |
| Hitch class | Class III |
Vehicle fitment
No vehicle list is attached to this mount, so use the shank size and drop to match your hitch before using it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 1 Inch ball hole must match a 1 Inch trailer ball, so confirm the ball size on your trailer before hooking up.









