Overview
The Curt Manufacturing CRT45155 is a Class III fusion mount that provides 2 Inches Rise. It is intended for trailers that need the hitch ball raised above the receiver. The black steel body carries a permanently attached ball.
It is a universal fit, so compatibility depends on the receiver and the trailer rather than a year, make or model.
Key features
- 2 Inches Rise for raised hitch height
- Permanently attached ball
- Black finish over steel
- 2 Inches X 2 Inches shank
Rise mount considerations
Rise mounts are useful with trailers that sit lower at the front than the tow vehicle’s hitch. Before choosing one, measure the height of the coupler and the receiver, then decide whether a rise will bring the trailer closer to level. A rise that is too high can change how the trailer tracks and how the tongue weight sits, so match the lift to the actual height difference.
Because the ball sits higher, the leverage on the receiver and shank changes. Check the receiver rating and total trailer weight before towing. Tighten all hardware fully, and check the pin and nuts after the first few miles.
Look at the shank and welds for cracks or bends at regular intervals, especially if the mount sees off-road use. A worn or bent mount should be replaced, and the ball should be kept clean and dry to limit corrosion.
- Compare coupler height to receiver height
- Confirm the receiver rating covers the trailer
- Inspect the shank after rough trips
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45155 |
| Amount of drop or rise | 2 Inches Rise |
| Finish | Black |
| Shank size | 2 Inches X 2 Inches |
| Ball hole size | Fixed |
| Material | Steel |
| Hitch class | Class III |
Vehicle fitment
This rise mount is not built for one vehicle, so its fit depends on whether the shank matches your receiver.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rise mount with its permanently attached ball.
Not included: a vehicle receiver hitch.









