Overview
The Curt Manufacturing CRT13396 is a Class III 2-inch rear receiver hitch. It is a direct fit for the 2017–2018 Land Rover Discovery in the HSE, HSE Luxury and SE trims, and it gives the vehicle a 2 Inches X 2 Inches receiver for towing and for carrying accessories.
This Class III hitch is built for towing from full-size cars and crossovers up to light-duty pickups and SUVs. Typical loads include fishing boat trailers, popup campers, ATV trailers and utility trailers, and a hitch-mounted cargo carrier or bike rack adds storage space. The lowest-rated towing component in the setup sets the limit for any tow.
Key features
- Class III/IV weight class.
- 2 Inches X 2 Inches receiver size.
- Rear mounting position.
- Direct fit design for the listed Land Rover Discovery trims.
- Suited to fishing boat trailers, popup campers and ATV trailers.
- Works with hitch-mounted cargo carriers and bike racks.
Before you tow with a Discovery
A rear receiver takes the load from the trailer tongue or a carrier and passes it into the frame, so the mounting points and the receiver tube both matter. Before any tow, check that the trailer tongue weight and the carrier weight stay inside the lowest rating in the setup, which is often the ball mount or the trailer coupler rather than the hitch. Bike racks and cargo carriers are common first uses on a receiver like this one, and they add weight close to the rear bumper.
Hitches can work loose and wear over time. Inspect the welds, the receiver tube and the bolts every few months if the hitch carries regular loads, and look for cracks, flaking coating or any movement at the bolt holes. Re-torque the mounting bolts after the first few trips, and keep a locking pin and clip in the receiver when it is empty so it stays secure.
- Check mounting bolts after the first few tows
- Inspect welds for cracks at the frame joints
- Match ball mount height to the trailer before hitching
- Use a locking pin and clip in the empty receiver
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13396 |
| Position | Rear |
| Fitment type | Direct fit |
| Receiver size | 2 Inches X 2 Inches |
| Weight class | Class III/IV |
Vehicle fitment
It fits the 2017–2018 Land Rover Discovery in the HSE, HSE Luxury and SE trims.
Other Discovery generations and model years, and other Land Rover models, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct-fit hitch. Check the fit against your Discovery’s rear frame before installing, and keep every tow within the lowest-rated part of the setup.
What’s included
Check the package contents against your installation before starting.











