Hitches
Showing 169–180 of 200 resultsSorted by popularity
-
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75135
- Rear Class III/IV max-frame trailer hitch for 2002 to 2003 Dodge Ram 1500
- Rated 5000 lbs. GTW and 10000 lbs. weight distributing
- 500 lbs. tongue weight and 1000 lb. weight distributing
- Mounts as a direct fit with no adapters
- Part number 75135
SKU: DRA75135 -
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75078
- DrawTite 75078 Class III/IV Max-Frame trailer hitch, rear mount
- Fits the 1996–2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims
- 5000lbs. GTW and 500lbs. tongue weight, with 5500lb and 550lb weight distribution ratings
- 2 Inches X 2 Inches receiver, no drilling required
SKU: DRA75078 -
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75054
- Rear Class III/IV max-frame trailer hitch for 1984 to 2001 Jeep Cherokee XJ and 1984 to 1990 Jeep Wagoneer SJ
- Rated up to 3,500 lbs. GTW weight carrying and 5,500 lbs. GTW weight distributing
- 2 inch square receiver tube opening, black powder coat
- Custom built per vehicle application; drilling required
- Part number 75054
SKU: DRA75054 -
Receiver Hitches
DrawTite Front Mount Receiver – 65014
- Front mount frame mount receiver for 1992 to 1996 Ford F-250 and F-350 pickups
- 2 inch by 2 inch receiver opening
- 500 lbs. tongue weight, weight carrying
- 9000 lbs. maximum gross trailer weight, weight distribution
- Part number 65014; weight class not rated
SKU: DRA65014 -
Receiver Hitches
DrawTite Front Mount Receiver – 65005
- Front mount receiver for 1988 to 2000 Chevrolet and GMC C/K trucks, Suburbans, Blazers, Tahoes and Yukons
- DrawTite front mount receiver hitch, part number 65005
- 2 inch by 2 inch receiver, 500 lbs tongue weight, 9000 lbs maximum gross trailer weight
- All welded construction, built to fit the vehicle without adapters
- Does not fit with a roll pan
SKU: DRA65005 -
Receiver Hitches
DrawTite Class V Ultra Frame Hitch – 41933
- Class V Ultra Frame rear receiver hitch
- Rated 10000 lbs GTW and 1000 lbs tongue weight
- Weight distributing ratings of 12000 lbs GTW and 1200 lbs tongue
- Fits 2006–2008 Ford F-150, 2006–2008 Lincoln Mark LT and 2007–2012 Toyota Tundra
- No drill required, install time 20 min, part 41933
SKU: DRA41933 -
Receiver Hitches
DrawTite Class III/IV Round Tube Max-E-Loader Trailer Hitch – 41551
- Class III/IV rear round tube Max-E-Loader receiver hitch
- Rated 6000 lbs GTW and 600 lbs tongue weight
- Weight distributing ratings of 10000 lbs and 1000 lbs
- Fits the 2004–2011 Nissan Titan
- Part number 41551, UPC 742512415513, install time 15 min
SKU: DRA41551 -
Receiver Hitches
DrawTite Class III/IV Max-E-Loader Trailer Hitch – 41536
- DrawTite Class III/IV Max-E-Loader rear trailer hitch, part number 41536
- 2-inch receiver, Class III/IV
- 6000lbs. GTW and 600lbs. tongue weight carrying
- 10000lb. GTW and 1000lb. tongue weight distributing
- Listed install time of 15 min
SKU: DRA41536 -
Receiver Hitches
DrawTite Class III/IV Max-E-Loader Trailer Hitch – 41531
- Class III/IV rear receiver hitch with a 2 inch by 2 inch receiver opening
- Rated 3500 lbs GTW and 300 lbs tongue weight
- Fits selected 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ trims.
- Welded construction, black powder coat, no drilling required
- Part number 41531, UPC 742512415315
SKU: DRA41531 -
Receiver Hitches
DrawTite Class III/IV Max-E-Loader Trailer Hitch – 41015
- Fits 1991–1997 Toyota Land Cruiser (Base) and 1996–1997 Lexus LX450 (Base)
- Class III/IV Max-E-Loader receiver hitch, rear position, 2 inch receiver
- 5000 lbs. GTW and 6000 lb weight distribution
- 500 lb tongue weight and 750 lb weight distribution tongue weight
- Part number 41015
SKU: DRA41015 -
Receiver Hitches
DrawTite Class II Frame Trailer Hitch – 36408
- Fits 2005–2013 Chevrolet Equinox, 2010–2012 GMC Terrain, 2006–2009 Pontiac Torrent and 2002–2007 Saturn Vue in the listed trims
- Class II frame hitch, rear position, 1.25 inch receiver
- Rated 3500 lb GTW and 300 lb tongue weight
- Ball mount, pin and clip included
- Part number 36408; no drill required
SKU: DRA36408 -
Receiver Hitches
DrawTite Class III Max-Frame Receiver Hitch – 76104
- Fits 2007–2017 Jeep Wrangler (JK) in the listed trims
- Class III max-frame receiver hitch, rear position, 2 inch square receiver
- Rated up to 4,500 lbs. GTW for weight carrying and weight distributing
- A-Coat base with black powder coat finish
- Part number 76104; does not fit right hand drive vehicles
SKU: DRA76104
Receiver hitch basics
A receiver hitch is a steel frame that bolts to the tow vehicle and presents a square opening for a ball mount, bike rack, or cargo carrier. Classes describe capacity and opening size. Class II typically uses a 1-1/4 inch receiver, while Class III, IV, and V commonly use 2-inch or larger openings with progressively higher ratings.
Most hitches here are vehicle-specific, which means the mounting points, bracket shape, and tailpipe clearance are designed for a given model. Multi-fit styles cover several vehicles but may need more care during installation.
Gooseneck and fifth wheel
Gooseneck and fifth wheel hitches mount to the truck frame under the bed and carry weight over or just ahead of the rear axle, which improves stability for heavy trailers. Look for in-bed ball mounts, install kits that fit your truck's frame, and handles, wedges, or adapters for existing rails.
Install kits and brackets are usually specific to a truck make, cab, and bed length. Compare part numbers carefully before choosing.
Choosing the right rating
- Check the vehicle's maximum tow rating and tongue weight rating in the owner's manual.
- Pick a hitch whose rated capacity meets or exceeds your trailer, but remember the lowest rating in the system governs.
- Consider weight distribution and sway control when trailer weight approaches the vehicle's limit.
- Look at features such as roll pan clearance, finish, and whether wiring is included.
Installing safely
Many hitches bolt into factory frame holes without drilling, though some need exhaust or bumper adjustments. Use the torque values the manufacturer specifies, support the hitch while you tighten fasteners, and recheck bolts after your first towing trips. For gooseneck and fifth wheel gear, professional installation is a sound choice because bed drilling and frame bracing are involved. Confirm fitment for your exact year, make, and model.
Pre-trip checks and common mistakes
A hitch is only as safe as its last inspection. Look over the welds and finish for cracks or rust, confirm every bolt is tight, and make sure the pin and clip are the correct size for the receiver. A loose-fitting ball mount can rattle, so some owners use an anti-rattle device or locking pin.
Common mistakes include forgetting to count the weight of cargo in the trailer, using a 1-1/4 inch receiver for loads that need a 2-inch one, and ignoring the ball height. Keep a written record of your vehicle's and trailer's ratings in the glovebox.
It also helps to know the parts around the hitch. A ball mount slides into the receiver and is secured by a pin and clip. The ball threads into the mount, and its shank diameter, commonly 3/4, 1, or 1-1/4 inch, must match the hole in the mount. The ball diameter, often 1-7/8, 2, or 2-5/16 inches, must match the trailer coupler. Check the rating stamped on each part.
Wiring is separate from the hitch. Most trailers use a 4-pin or 7-pin connector, and adapters are common. Safety chains should cross under the tongue and attach to the vehicle's chain loops, not the ball mount.
Finally, think about corrosion. Hitches live under the rear bumper where road salt and water collect. Touch up chips with paint, keep the receiver interior lightly greased, and pull the pin occasionally so it does not seize in place.
Popular Hitches brands
- Curt Manufacturing (92)
- DrawTite (48)
- B&W Hitch (33)
- Rugged Ridge (7)
- Smittybilt (5)
- Warn (3)
- Reese (3)
- Trimax Locks (2)
- Pro Series (2)
- Fab Fours (2)
- Fastway Trailer Products (2)
- Street Scene (1)
Shop Hitches by type
- Receiver Hitches (151)
- Weight Distributing Hitch (8)
- Gooseneck Trailer Hitch Ball (7)
- Fifth Wheel Trailer Hitch Head Unit (6)
- Fifth Wheel Trailer Hitch (3)
- Trailer Hitch Adapter (2)
- Weight Distributing Hitch Sway Control (1)
- Fifth Wheel Trailer Hitch Handle (1)
- Fifth Wheel Trailer Hitch Wedge (1)
Hitches FAQ
What is the difference between Class III and Class IV hitches?
Both usually use a 2-inch receiver, but Class IV has a higher rating than Class III. Exact ratings vary by manufacturer and by whether you use weight distribution, so check the specifications on the product and your vehicle's own tow rating.
Will a hitch fit with a roll pan?
Not always. Some hitches are designed to clear a roll pan and others are not. Listings sometimes state this directly. Check the fitment notes, and confirm against your exact year, make, and model.
What does a weight distributing hitch do?
It uses spring bars to spread part of the tongue weight to the tow vehicle's front axle and the trailer axles. This helps level the vehicle and can improve steering feel and braking when towing heavier trailers.
Can I install a hitch myself?
Many bolt-on receiver hitches are manageable with basic tools, a torque wrench, and a helper. Gooseneck and fifth wheel installs are more involved and often benefit from professional installation. Follow the maker's instructions and torque specifications.











