Drop Hitches & Ball Mounts
Showing 49–60 of 86 resultsSorted by popularity
-
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Fusion Mount (Black) – 45152
- Class III fusion mount, Curt Manufacturing part CRT45152
- 2 Inches Rise raises the hitch ball
- 2 Inches X 2 Inches shank in black steel
- Permanently attached ball; fixed ball hole
- Universal fit, no specific vehicle named
SKU: CRT45152 -
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Fusion Mount (Black) – 45134
- Class III fusion drop mount, Curt Manufacturing part CRT45134
- 2 Inch Drop for trailer leveling
- 2 Inches X 2 Inches shank, black steel construction
- Ball is permanently attached to the mount
- Universal fit, not tied to one vehicle
SKU: CRT45134 -
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Fusion Mount (Black) – 45131
- Class III fusion drop mount, Curt Manufacturing part CRT45131
- 2 Inch Drop lowers the hitch ball to level a trailer
- 2 Inches X 2 Inches shank in a steel body with a gloss black finish
- Permanently attached ball that stays with the mount; ball hole is fixed.
- Universal fit, not tied to specific vehicles.
SKU: CRT45131 -
-
-
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Ball Mount (Black) – 45040
- Curt Manufacturing Class III ball mount, part number 45040
- 2 inch drop with a 2 inch by 2 inch shank
- 1 inch ball hole size
- Black steel construction
- Fit depends on the receiver and the trailer coupler, so check both before ordering.
SKU: CRT45040 -
-
-
Drop Hitches & Ball Mounts
Curt Manufacturing Adjustable Forged Ball Mount (Black) – 45900
- Curt Manufacturing adjustable forged ball mount, part number CRT45900
- 2 Inches X 2 Inches shank with black steel finish
- Adjustable drop or rise with fixed ball hole
- Recommended for towing over 6000 lbs on a bumper hitch
SKU: CRT45900 -
Drop Hitches & Ball Mounts
Curt Manufacturing Adjustable Ball Mount (Black) – 45812
- Class 3 adjustable ball mount with a 2 inch x 2 inch shank
- Adjusts to a maximum drop of 7 1/4 inch and a maximum rise of 6 1/4 inch
- Rated for 5,000 lbs gross trailer weight and 500 lbs tongue weight
- 1 inch ball hole platform accepts the trailer ball of your choice
SKU: CRT45812 -
Trailer Hitch Ball Bushing
Curt Manufacturing Adapter Sleeve – 45405
- Curt Manufacturing 45405 reducer sleeve adapter, part number CRT45405
- Converts a 2-1/2 x 2-1/2 inch receiver tube opening to a 2 x 2 inch opening
- Universal fit: compatibility depends on receiver tube size, not vehicle model
- Black carbide powder coat finish for rust, chip and UV resistance
- Gross trailer weight and tongue weight are limited to the hitch
SKU: CRT45405 -
What goes in this category
The ball mount is the removable piece that slides into the receiver tube and carries the ball. A drop hitch lowers the ball, a rise hitch lifts it, and both let the trailer sit level. Related items in this category include the hitch ball itself, the pin that locks the mount in the receiver, locking pins for the coupler, and bushings that reduce rattle.
How to choose a ball mount
Start with the receiver size. Common shank sizes are 1-1/4 inch for light-duty classes and 2 inch for heavier classes, and the mount must match your receiver. Then measure the ride height: with the trailer level, measure from the ground to the top of the receiver opening and from the ground to the bottom of the coupler. The difference tells you how much drop or rise you need.
- Fixed mounts: Simple and strong for a single trailer.
- Adjustable mounts: Useful if you tow different trailers or have a height-varying setup.
- Multi-ball mounts: Hold more than one ball size for different couplers.
Ratings and sizes
Every part in the towing chain has a rating, and the lowest one governs. Check the mount's gross trailer weight and tongue weight ratings and compare them to your trailer, your receiver class and the tow rating in your owner's manual. Hitch balls come in different diameters, such as 1-7/8, 2 and 2-5/16 inches, and the ball must match the coupler stamped size. The shank diameter has to fit the hole in the mount, and the ball needs the proper nut and washer torque.
Safety and installation notes
Use a mount rated at or above your loaded trailer's weight. A level trailer tows more stably and puts the weight where it should be. A coupler that rides nose-high or nose-low can affect braking and sway. Torque the ball nut to the manufacturer's specification and check it regularly, and always install the hitch pin and a clip or lock.
Confirm that the mount fits your receiver and vehicle, and check that your vehicle's tow rating and hitch class support the load. If you are unsure about weight distribution or trailer sway control, a professional hitch shop can help. Never exceed the lowest rated component in the setup, and verify ratings in the manufacturer's specifications.
Maintenance and common mistakes
Inspect the ball and mount before each season. Look for cracks in the shank, bent platforms, deep rust, and wear on the ball surface, which should be smooth and round. A ball that is flattened or pitted can cause coupler wear and should be replaced. Keep the ball lightly greased unless your coupler instructions say otherwise, and wipe it clean after each trip.
Rattle in the receiver is common and mostly cosmetic, but it can wear the receiver tube over time. Anti-rattle devices and bushings address this, and they are separate from the load-carrying parts. The hitch pin should be the correct diameter for the receiver, such as 5/8 inch for many class III and IV receivers, and a lock helps deter theft.
Common mistakes include using a mount rated for a lighter class, forgetting the clip on the pin, overtightening the ball nut past its torque, and ignoring tongue weight. As a general guideline, tongue weight is often around 10 to 15 percent of trailer weight for conventional trailers, but follow the trailer maker's recommendation. Store the mount in a dry place when it is not being used.
Popular Drop Hitches & Ball Mounts brands
- Curt Manufacturing (47)
- DrawTite (9)
- BOLT Lock (9)
- Weigh Safe Hitches (8)
- B&W Hitch (5)
- Fastway Trailer Products (2)
- Smittybilt (2)
- Trimax Locks (2)
- Jeep (2)
Shop Drop Hitches & Ball Mounts by type
Drop Hitches & Ball Mounts FAQ
How do I know how much drop I need?
Park on level ground with the trailer level. Measure from the ground to the top of the receiver opening and from the ground to the coupler's bottom. The difference is the drop or rise you need.
What do the hitch classes mean?
Classes group receivers by capacity and size, from Class I for light loads up to Class V for heavy trailers. Class III and IV commonly use 2 inch receivers. Your vehicle's tow rating and the lowest rated part still apply.
How do I choose the right ball size?
Read the size stamped on the trailer coupler, commonly 1-7/8, 2 or 2-5/16 inches. The ball must match that size, fit the mount's hole diameter, and be rated for the trailer's weight.
Is an adjustable ball mount a good idea?
It can be, especially if you tow multiple trailers. It has more moving parts, so check that the rating matches your load and that all locking hardware is secure and torqued before each trip.











