Overview
The Curt Manufacturing Class I/II Ball Mount in black, part number CRT45521, provides a 3 Inch drop on a 1.25 Inches X 1.25 Inches shank for hitch receivers in these classes.
The mount has square receiver tube construction and is rated for 2,000 GTW and 200 LB. TW. It has a gloss black powder coat finish.
Key features
- 3 Inch drop height
- Square receiver tube design
- 3/4 Inches ball hole
- Gloss black powder coat
- Steel construction
Why drop height changes towing
A 3 inch drop raises the trailer ball above the hitch receiver, which changes how the trailer sits when hitched. Measure coupler height and confirm the trailer rides level before towing. An overly high ball can cause the tongue to push down or pull up, changing steering feel and braking.
The same square tube and powder coat that protect the mount also need upkeep. Check the coating after each season for chips, and touch them up to keep moisture from reaching the steel. Re-tighten the ball nut after the first few miles, and check the pin for wear before each trip.
- Measure coupler height before hooking up
- Touch up chipped powder coat
- Check the pin for wear before each trip
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45521 |
| Drop | 3 Inch Drop |
| Shank size | 1.25 Inches X 1.25 Inches |
| Ball hole size | 3/4 Inches |
| Material | Steel |
| Finish | Gloss black powder coat |
| Gross trailer weight rating | 2,000 GTW |
| Tongue weight rating | 200 LB. TW |
Vehicle fitment
No vehicle is named for this mount, so match the 1.25 Inches X 1.25 Inches shank to your receiver before using it.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The 3 Inch drop changes the ball height, so measure your trailer coupler height before hooking up.









