Overview
The Curt Manufacturing Adjustable Forged Ball Mount in black, part number CRT45900, is a steel ball mount with a 2 Inches X 2 Inches shank for bumper hitch towing.
The adjustable drop or rise gives a range of options, and this mount is recommended for towing more than 6000 lbs on a bumper hitch.
Key features
- Adjustable drop or rise
- Forged ball mount design
- 2 Inches X 2 Inches shank
- Black finish
- Fixed ball hole
Setting drop and hitch height
A ball mount carries the full tongue load of the trailer, so the shank must fit the receiver snugly and the drop setting must suit the trailer. Check that the mount sits level and that the pin is fully seated before connecting any trailer. Tongue weight matters as much as trailer weight.
Steel mounts wear through rust and bending, so inspect the welds, finish and ball area often. Look for hairline cracks, bent arms, or looseness at the shank. Replace the mount rather than straightening a bent one, since bending weakens steel. Hitch height changes with load, so recheck the level after loading the trailer.
- Check the ball nut is tight before each trip
- Look for rust or chips in the black finish
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45900 |
| Drop or rise | Adjustable |
| Shank size | 2 Inches X 2 Inches |
| Ball hole size | Fixed |
| Finish | Black |
| Material | Steel |
| Recommended towing | More than 6000 lbs on a bumper hitch |
Vehicle fitment
It is not tied to one vehicle. Match the 2 Inches X 2 Inches shank to your hitch receiver.
Confirm your vehicle’s year, model and trim before ordering, and check that the receiver matches the shank size.
Installation notes
Check the drop setting and the 6000 lbs towing guidance before hooking up any trailer.
















