Drop Hitches & Ball Mounts
Showing 37–48 of 86 resultsSorted by popularity
-
Trailer Hitch Pin Lock
Curt Manufacturing Hitch And Coupler Locks – 23556
- Two keyed-alike locks and four keys for a CURT adjustable channel mount
- Each lock replaces one hitch pin in the channel mount
- Opens with a simple 1/4-turn mechanism
- Part number CRT23556 from Curt Manufacturing
- Universal fit. Channel mount components are not included.
SKU: CRT23556 -
-
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Tow Starter Kit (Black) – 45554
- Class III tow starter kit, Curt Manufacturing part CRT45554
- Drop ball mount with 2 Inches Rise
- Includes 5/8in locking pin and trailer ball in a carrying case
- 1.25 Inches X 1.25 Inches black steel shank
- Universal fit for any matching receiver
SKU: CRT45554 -
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Loaded Ball Mount (Black) – 45055
- Curt Manufacturing Class III loaded ball mount, part number CRT45055
- 4-inch drop with a 1-inch ball hole
- 2 inches by 2 inches steel shank
- Steel body with black powder coat
- Universal fit, not tied to one vehicle
SKU: CRT45055 -
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Loaded Ball Mount (Black) – 45042
- Class III loaded ball mount, Curt Manufacturing part CRT45042
- 4 Inch Drop for deeper hitch height
- 1 Inch ball hole and 2 Inches X 2 Inches shank
- Permanently attached ball in black steel
- Universal fit, so the receiver decides the match
SKU: CRT45042 -
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Loaded Ball Mount (Black) – 45036
- Class III loaded ball mount, Curt Manufacturing part CRT45036
- 2 Inch Drop with a 1 Inch ball hole
- Steel body with 2 Inches X 2 Inches shank
- Permanently attached ball
- Universal fit; no specific vehicle named
SKU: CRT45036 -
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Loaded Ball Mount (Black) – 45034
- Class III loaded ball mount, Curt Manufacturing part CRT45034
- 2 Inch Drop with a 1 Inch ball hole
- 2 Inches X 2 Inches shank in black steel
- Permanently attached ball prevents loss
- Universal fit with no single year, make or model
SKU: CRT45034 -
-
Drop Hitches & Ball Mounts
Curt Manufacturing Class III Fusion Mount (Black) – 45154
- Class III fusion drop mount, Curt Manufacturing part CRT45154
- 4 Inch Drop for lower hitch height
- 2 Inches X 2 Inches shank, steel with gloss black powder coat
- Permanently attached ball, fixed ball hole
- Universal fit, not built for one year, make or model
SKU: CRT45154
What goes in this category
The ball mount is the removable piece that slides into the receiver tube and carries the ball. A drop hitch lowers the ball, a rise hitch lifts it, and both let the trailer sit level. Related items in this category include the hitch ball itself, the pin that locks the mount in the receiver, locking pins for the coupler, and bushings that reduce rattle.
How to choose a ball mount
Start with the receiver size. Common shank sizes are 1-1/4 inch for light-duty classes and 2 inch for heavier classes, and the mount must match your receiver. Then measure the ride height: with the trailer level, measure from the ground to the top of the receiver opening and from the ground to the bottom of the coupler. The difference tells you how much drop or rise you need.
- Fixed mounts: Simple and strong for a single trailer.
- Adjustable mounts: Useful if you tow different trailers or have a height-varying setup.
- Multi-ball mounts: Hold more than one ball size for different couplers.
Ratings and sizes
Every part in the towing chain has a rating, and the lowest one governs. Check the mount's gross trailer weight and tongue weight ratings and compare them to your trailer, your receiver class and the tow rating in your owner's manual. Hitch balls come in different diameters, such as 1-7/8, 2 and 2-5/16 inches, and the ball must match the coupler stamped size. The shank diameter has to fit the hole in the mount, and the ball needs the proper nut and washer torque.
Safety and installation notes
Use a mount rated at or above your loaded trailer's weight. A level trailer tows more stably and puts the weight where it should be. A coupler that rides nose-high or nose-low can affect braking and sway. Torque the ball nut to the manufacturer's specification and check it regularly, and always install the hitch pin and a clip or lock.
Confirm that the mount fits your receiver and vehicle, and check that your vehicle's tow rating and hitch class support the load. If you are unsure about weight distribution or trailer sway control, a professional hitch shop can help. Never exceed the lowest rated component in the setup, and verify ratings in the manufacturer's specifications.
Maintenance and common mistakes
Inspect the ball and mount before each season. Look for cracks in the shank, bent platforms, deep rust, and wear on the ball surface, which should be smooth and round. A ball that is flattened or pitted can cause coupler wear and should be replaced. Keep the ball lightly greased unless your coupler instructions say otherwise, and wipe it clean after each trip.
Rattle in the receiver is common and mostly cosmetic, but it can wear the receiver tube over time. Anti-rattle devices and bushings address this, and they are separate from the load-carrying parts. The hitch pin should be the correct diameter for the receiver, such as 5/8 inch for many class III and IV receivers, and a lock helps deter theft.
Common mistakes include using a mount rated for a lighter class, forgetting the clip on the pin, overtightening the ball nut past its torque, and ignoring tongue weight. As a general guideline, tongue weight is often around 10 to 15 percent of trailer weight for conventional trailers, but follow the trailer maker's recommendation. Store the mount in a dry place when it is not being used.
Popular Drop Hitches & Ball Mounts brands
- Curt Manufacturing (47)
- BOLT Lock (9)
- DrawTite (9)
- Weigh Safe Hitches (8)
- B&W Hitch (5)
- Smittybilt (2)
- Trimax Locks (2)
- Jeep (2)
- Fastway Trailer Products (2)
Shop Drop Hitches & Ball Mounts by type
Drop Hitches & Ball Mounts FAQ
How do I know how much drop I need?
Park on level ground with the trailer level. Measure from the ground to the top of the receiver opening and from the ground to the coupler's bottom. The difference is the drop or rise you need.
What do the hitch classes mean?
Classes group receivers by capacity and size, from Class I for light loads up to Class V for heavy trailers. Class III and IV commonly use 2 inch receivers. Your vehicle's tow rating and the lowest rated part still apply.
How do I choose the right ball size?
Read the size stamped on the trailer coupler, commonly 1-7/8, 2 or 2-5/16 inches. The ball must match that size, fit the mount's hole diameter, and be rated for the trailer's weight.
Is an adjustable ball mount a good idea?
It can be, especially if you tow multiple trailers. It has more moving parts, so check that the rating matches your load and that all locking hardware is secure and torqued before each trip.











