Overview
The Curt Manufacturing CRT45812 is a class 3 adjustable ball mount with a 2 inch x 2 inch shank, built for owners who tow several trailers and do not want to swap mounts for each one. Its series of holes lets the ball height be set up or down, so the mount can match different coupler heights.
Many adjustable mounts come with a fixed trailer ball. This model instead has a trailer ball platform with a 1 inch ball hole, so you can use the trailer ball you prefer. It is rated for 5,000 lbs gross trailer weight and 500 lbs tongue weight, and its total length is 12 1/2 inch.
Key features
- Class 3 rating with an adjustable shank
- 2 inch x 2 inch shank
- Adjustment increments of 1 1/2 inch
- Maximum drop of 7 1/4 inch and maximum rise of 6 1/4 inch
- Trailer ball platform with a 1 inch ball hole
- Gross trailer weight rating of 5,000 lbs and tongue weight rating of 500 lbs
- Steel construction with a gloss black powder coat for rust, scratch and UV resistance
Choosing a lift height
Adjustable ball mounts let one hitch serve several trailers, but the height you choose affects how level the trailer rides. Measure the trailer coupler height with the trailer parked on level ground, then compare it with the drop or rise you need. Each adjustment step is 1 1/2 inch, so the nearest hole may leave the trailer slightly nose-high or nose-low. A small change can matter on longer trailers, where the front of the trailer should sit close to level.
Shank fit deserves a check before every trip. Slide the shank into the receiver, then tighten the pin and clip so the mount does not rattle. Over time, inspect the shank for wear, cracks or flattened spots around the adjustment holes. Re-check the pin after the first few tows, since vibration can loosen it.
- Keep a spare clip or pin on hand
- Recheck trailer level after each height change
- Match the ball shank to the platform’s 1 inch hole
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45812 |
| Ball mount class | Class 3 |
| Shank size | 2 inch x 2 inch |
| Ball hole size | 1 inch |
| Adjustment | Adjustable, in 1 1/2 inch increments |
| Maximum drop | 7 1/4 inch |
| Maximum rise | 6 1/4 inch |
| Total length | 12 1/2 inch |
| Gross trailer weight | 5,000 lbs |
| Tongue weight | 500 lbs |
| Material | Steel |
| Finish | Gloss black powder coat |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit mount, so its 2 inch x 2 inch shank must match the receiver on your vehicle, and the trailer ball must match your coupler. Confirm your year, model and trim fit this mount before ordering.
Check the receiver size and shank before installing, since a class 3 mount is not interchangeable with every hitch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the height using the adjustment holes, then confirm the trailer sits level. Keep loads within the mount’s 5,000 lbs gross trailer weight and 500 lbs tongue weight ratings and within the rating of your receiver.
What’s included
The adjustable ball mount with its trailer ball platform and adjustable shank.
Not included: a trailer ball. The platform is designed to accept the trailer ball of your choice.














